Airbag control unit with part number 95910-F2200

What does the airbag control unit 95910-F2200 do?

The airbag control unit 95910-F2200 governs the triggering of the airbags and seatbelt pretensioners in the restraint system (SRS) of Hyundai. The decision is made in a collision within milliseconds, based on the data from the crash sensors.

The unit monitors the system continuously. If it detects a fault, it creates an entry in the fault memory and reports it via the airbag warning light.

After an accident, crash data is stored in the control unit, and then it locks itself.

Why does the control unit 95910-F2200 fail?

The most common cause of the 95910-F2200 failing is stored crash data left behind after an accident, even if no airbag has triggered. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are further causes.

A standard diagnostic tool cannot erase this crash data, so it remains in the memory. Airbag24 removes it during the repair.

Aged electronics are a general phenomenon, and cold solder joints and corrosion weaken the contact at the plugs. Moisture makes the problem worse. Voltage spikes occur, for example, with a weak battery or during a jump start.

How can you tell that the 95910-F2200 is defective?

A defect on the 95910-F2200 shows when the airbag warning light in the instrument cluster lights up permanently or intermittently and a fault message appears. Likewise, it is noticeable if the diagnostic tool cannot connect or the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then not trigger in an emergency.

The warning light in the instrument cluster is the most important warning sign, which the control unit itself gives you. A fault message in the display confirms this finding.

Whether the control unit or another component is affected can only be determined by the readout.

Which vehicles is the 95910-F2200 fitted in?

The 95910-F2200 is fitted in these vehicles: Hyundai Elantra AD.

Airbag24 assigns the following vehicles to this part number. The vehicles are listed here:

• Hyundai Elantra AD

A comparison of the part number on the label of the removed unit with this page only shows whether the correct unit is present. You should also have the fault memory read out beforehand, because only that result decides whether the control unit is defective or a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2200 work?

Processing at Airbag24 usually takes 3–4 working days. Beforehand, you read out the fault memory, attach the log and disconnect the battery. Then remove the 95910-F2200 and create the repair order online.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2200 get to Airbag24?

You send the 95910-F2200 in as a parcel, or you book a UPS collection for an extra charge. The return after the repair is made by UPS.

Pack the unit shock-proof and enclose the printed repair order.