Airbag control unit with part number 95910-F2300

What does the airbag control unit 95910-F2300 do?

The airbag control unit 95910-F2300 coordinates the restraint system (SRS) of Hyundai. It checks the signals from the crash sensors, decides in an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously.

The evaluation takes place in the vehicle itself, without any action required from you. The unit shows faults via the airbag warning light.

After an accident, it stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-F2300 fail?

The most common cause is crash data after an accident, even if no airbag has been triggered; a normal diagnostic tool cannot erase it. Other causes include aged components, cold solder joints, moisture and corrosion at plugs, and voltage spikes, for example from a weak battery or a jump start.

Crash data remains in the unit until it is specifically removed. As a result, the fault stays in the fault memory even if the vehicle continues to be driven.

Over time, components lose reliability. Moisture attacks contacts, and voltage spikes stress the circuit.

How can you tell that the 95910-F2300 is defective?

A defect shows up in the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition, there is a fault message, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

• airbag warning light lights up permanently or intermittently
• fault message in the instrument cluster display
• diagnostic tool receives no connection to the control unit
• fault memory cannot be cleared

In an emergency, the airbags and seatbelt pretensioners may then fail to trigger.

The warning light alerts you to the defect. Have the fault memory read out as soon as it comes on.

Which vehicles is the 95910-F2300 fitted in?

The airbag control unit 95910-F2300 is fitted in these vehicles: Hyundai Elantra AD.

The following vehicles are linked to this part number:

• Hyundai Elantra AD

Comparing the part number on the label of the removed unit with this page only ensures that it is the right unit. Whether the control unit is defective or whether a plug or cable is the cause is shown only by the fault memory that you read out beforehand.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2300 work?

Processing at Airbag24 usually takes 3–4 working days. You begin by reading out the fault memory, enclosing the log, disconnecting the battery and only then removing the control unit. Next, you create a repair order online and send in the unit.

Put the log into the parcel. At Airbag24, the unit is checked on the test bench, defective components are replaced, crash data is erased and a function test is carried out.

Your unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2300 get to Airbag24?

You can send the unit in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Pack the unit shockproof and enclose the printed repair order.