Airbag control unit with part number 95910-F2400

What does the airbag control unit 95910-F2400 do?

The airbag control unit 95910-F2400 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the crash sensors, determines in a crash within milliseconds which airbags and seatbelt pretensioners are triggered, and monitors the system continuously.

It indicates irregularities via the airbag warning light. After a crash the unit stores crash data and locks itself.

The connection to the sensors and seatbelt pretensioners is checked continuously during operation.

Why does the control unit 95910-F2400 fail?

The most common cause with the 95910-F2400 is crash data from an accident, even without a triggered airbag; it cannot be erased with a normal diagnostic tool. Other causes are aged components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes.

Stored crash data remains even though the vehicle looks unremarkable after the accident.

Other causes in general:

• aged electronic components
• cold solder joints
• moisture and corrosion on plug connections
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-F2400 is defective?

A defect on the 95910-F2400 becomes recognisable through the airbag warning light, which lights up permanently or intermittently, and through a fault message in the instrument cluster. In addition, the diagnostic tool gets no connection, and the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then not deploy in an emergency.

The airbag warning light in the instrument cluster indicates a fault that the system has detected itself. A fault memory that cannot be cleared confirms that the system is not working without fault and should be examined promptly.

Which vehicles is the 95910-F2400 fitted in?

The airbag control unit 95910-F2400 is fitted in these vehicles: Hyundai Elantra AD.

The list shows the vehicles in which this unit has been installed.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. This only ensures that it is the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2400 work?

First have the fault memory read out and attach the log. Then disconnect the battery, and only then remove the control unit 95910-F2400. Next, create a repair order online and send the unit in.

Airbag24 checks the unit on the test bench, replaces defective components, erases the stored crash data and carries out a functional test. Processing usually takes 3–4 working days, after which the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2400 get to Airbag24?

The unit goes to Airbag24 either as a parcel or, for an extra charge, collected by UPS. After the repair, Airbag24 sends the control unit 95910-F2400 back by UPS.

The printed repair order goes in the parcel, and the unit must be packed shockproof.