Airbag control unit with part number 95910-F2500

What does the airbag control unit 95910-F2500 do?

The airbag control unit 95910-F2500 is the central unit of the restraint system in Hyundai vehicles. It processes the signals from the sensors, decides in an accident on the triggering of airbags and seatbelt pretensioners, and monitors the entire system.

The unit passes detected faults on to the airbag warning light in the instrument cluster.

After an accident it creates crash data and then locks itself.

Why does the control unit 95910-F2500 fail?

The entry of stored crash data is the most common cause with the 95910-F2500, even when no airbag fired. A standard diagnostic tool cannot erase this data. Further causes are aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data stays stored until it is specifically erased. Until then the fault persists in the system.

The remaining causes lie in the electronics or at the connections. Salt and damp attack contacts, and voltage spikes, for example from a weak battery or a jump start, stress components.

How can you tell that the 95910-F2500 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently if the 95910-F2500 has a fault. Added to this are a fault message in the instrument cluster, a missing connection to the diagnostic tool and a fault memory that cannot be cleared.

As long as the system is faulty, airbags and seatbelt pretensioners may fail to deploy in an emergency. The light shows this condition directly and must therefore be taken seriously.

Which vehicles is the 95910-F2500 fitted in?

The airbag control unit 95910-F2500 is fitted in these vehicles: Hyundai Elantra AD. The details refer to Hyundai.

The assignment lists these vehicles:

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. This confirms only that it is the right unit, nothing more. You also have the fault memory read out before removal, because only this log shows whether the control unit is faulty or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2500 work?

First have the fault memory read out and enclose the log. Then disconnect the battery; only after that do you remove the control unit. Afterwards create a repair order online and send in the unit well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces faulty components, erases stored crash data and carries out a function test. Your own unit then comes back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2500 get to Airbag24?

You send the control unit 95910-F2500 as a parcel to Airbag24 or book a UPS collection for an extra charge. After the repair, UPS brings the unit back.

Put the printed repair order in the parcel and pack the unit shock-resistant.