Airbag control unit with part number 95910-F2700

What does the airbag control unit 95910-F2700 do?

The airbag control unit 95910-F2700 controls the restraint system (SRS) of Hyundai. It evaluates the signals from the crash sensors and decides in a crash, within milliseconds, which airbags and seatbelt pretensioners are triggered.

It also monitors the system continuously. It reports faults via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself. It therefore also serves as a store of the accident.

Why does the control unit 95910-F2700 fail?

The most common cause is stored crash data, even if no airbag has been triggered. Further causes lie in the unit itself and only show up during the inspection.

A normal diagnostic tool cannot erase the crash data. Airbag24 erases it during the repair.

The other causes at a glance:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-F2700 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently and thus gives the clearest indication. In addition, fault messages appear in the instrument cluster, the diagnostic tool cannot find the control unit, or the fault memory cannot be cleared.

While the light is on, airbags and seatbelt pretensioners may possibly not deploy in an emergency. Therefore have what the display indicates checked promptly.

Which vehicles is the 95910-F2700 fitted in?

The control unit 95910-F2700 is fitted in these vehicles: Hyundai Elantra AD.

The vehicles known to us for this part number are listed here:

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. That only shows that it is the right unit. Whether the control unit is defective or a plug or a cable is the cause is shown only by the fault memory, which you have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-F0200, 95910-F0250, 95910-F0260, 95910-F0300, 95910-F2000, 95910-F2100.

How does the repair of the 95910-F2700 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Then create a repair order online and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 inspects the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. The unit is then sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2700 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Pack the unit shockproof and place the printed repair order in the parcel.