Airbag control unit with part number 95910-F2800

What does the airbag control unit 95910-F2800 do?

The airbag control unit 95910-F2800 centrally controls the restraint system (SRS) in Hyundai vehicles. It evaluates sensor signals, determines in a crash within milliseconds which airbags and seatbelt pretensioners are to be triggered, and monitors the system constantly. It reports faults via the airbag warning light.

The sensors continuously deliver measured values to the unit. From these, it calculates whether an impact requires triggering.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-F2800 fail?

On the 95910-F2800, the most common cause lies in stored crash data, even if no airbag was triggered. In addition come aged electronics, cold solder joints, moisture and corrosion at plugs, and voltage spikes from a weak battery or a jump start.

A normal diagnostic tool cannot erase crash data. Airbag24 takes over the erasing as part of the repair.

The other causes affect components and connections. Electronics age, solder joints give way over time, and moisture attacks plugs.

How can you tell that the 95910-F2800 is defective?

A defect on the 95910-F2800 becomes visible through the airbag warning light in the instrument cluster, through a fault message in the instrument cluster, or because the diagnostic tool cannot establish a connection. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

Signs include:

• airbag warning light stays on permanently
• airbag warning light comes on intermittently
• fault message in the instrument cluster
• diagnostic tool does not find the control unit
• fault memory cannot be cleared

Have such signs checked promptly. The read-out fault memory shows what lies behind them.

Which vehicles is the 95910-F2800 fitted in?

The airbag control unit 95910-F2800 is fitted in these vehicles: Hyundai Elantra AD. The details refer to Hyundai.

The vehicle list in detail:

• Hyundai Elantra AD

Comparing the part number on the label of the removed unit with this page only ensures that it is the right unit. Have the fault memory read out before removal as well, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-F0200, 95910-F0250, 95910-F0260, 95910-F0300, 95910-F2000, 95910-F2100.

How does the repair of the 95910-F2800 work?

For the 95910-F2800, first have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. The processing at Airbag24 usually takes 3–4 working days.

Next, create the repair order online and send the unit in well packed. Airbag24 then examines it, replaces defective components, erases crash data and carries out a function test. Afterwards your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2800 get to Airbag24?

You send the control unit 95910-F2800 by parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

The printed repair order belongs in the parcel, and the unit must be packed shock-resistant.