Airbag control unit with part number 95910-F2950

What does the airbag control unit 95910-F2950 do?

The airbag control unit 95910-F2950 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and, in an accident within milliseconds, decides which airbags and seatbelt pretensioners are triggered.

During operation the unit monitors the entire system. If it detects a fault, it shows this via the airbag warning light in the instrument cluster, possibly together with a message on the display.

After an accident the control unit stores crash data and locks itself. This lock is lifted only when the unit is repaired.

Why does the control unit 95910-F2950 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase this data. Added to this are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting.

The control unit records crash data after an accident, regardless of whether an airbag finally deploys. The data remain stored in the unit until they are removed during the repair.

The other causes mainly affect the electronics and their connections. Solder joints can give way over the years, moisture and rust attack the plug contacts, and voltage spikes from the on-board network put additional strain on the components.

How can you tell that the 95910-F2950 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, a fault message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit 95910-F2950, and the fault memory cannot be cleared.

The warning light is the clearest hint the vehicle gives itself. It can stay on permanently or come on only now and then; in both cases there is a fault in the restraint system.

In case of a defect, airbags and seatbelt pretensioners may possibly not deploy in an emergency. A warning light that comes on therefore calls for prompt clarification.

Which vehicles is the 95910-F2950 fitted in?

The airbag control unit 95910-F2950 is fitted in these vehicles: Hyundai Elantra AD.

The following list names the vehicles known to us for this part number.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. That only ensures you have the correct unit in front of you. Also have the fault memory read out in advance, because only this result shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2950 work?

Processing at Airbag24 usually takes 3–4 working days. First have the fault memory read out and attach the log, then disconnect the battery and only then remove the control unit 95910-F2950. Afterwards create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, deletes the stored crash data and carries out a function test. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2950 get to Airbag24?

You send the unit in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns the control unit 95910-F2950 by UPS.

Place the printed repair order in the parcel and pack the unit shockproof.