Airbag control unit with part number 95910-F6300

What does the airbag control unit 95910-F6300 do?

Kia uses the airbag control unit 95910-F6300 as the switching point of its restraint system (SRS). The measured data from the impact sensors converge there, and the unit determines which airbags and seatbelt pretensioners trigger in an accident.

The control unit monitors its surroundings continuously during operation. If it detects a fault, it stores it and reports it via the airbag warning light.

After an accident it creates crash data and then locks itself.

Why does the control unit 95910-F6300 fail?

Crash data from an accident is the most common cause, even if no airbag has deployed; a normal diagnostic tool cannot reach it. Added to this are ageing components, cold solder joints, moisture and corrosion on plugs, and voltage spikes, for example with a weak battery or a jump start.

The stored crash data records that the control unit has registered an impact. As long as it is present, it cannot be removed with ordinary diagnostic equipment. Airbag24 removes it during the repair.

The other triggers develop more gradually. Electronics age, solder joints become susceptible over time, and moisture corrodes contacts. Voltage spikes at start-up or a weakened battery can burden the electronics additionally.

How can you tell that the 95910-F6300 is defective?

The airbag warning light in the instrument cluster, which lights permanently or intermittently, is the first sign. Fault messages in the instrument cluster can accompany it, a diagnostic tool may find no control unit, and the fault memory remains. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The warning light is one of the most important warning signals in the vehicle. Note whether it goes out after starting, because permanent lighting indicates a detected fault.

Fault messages and connection problems with the diagnostic tool give a hint that something is wrong, but they do not yet name the cause. That requires the inspection.

Which vehicles is the 95910-F6300 fitted in?

It is a control unit for Kia. The 95910-F6300 is fitted in these vehicles: Kia Cadenza VG (2009-2016).

The list of stored vehicles follows here.

• Kia Cadenza VG (2009-2016)

You can make the label comparison on the removed unit yourself; it only confirms that you have the correct unit. Also get the log of the fault memory before you remove anything, because it shows whether the control unit itself is defective or whether a cable, for example, is the cause.

For the same vehicles, we also repair control units with the part numbers 95910F6500.

How does the repair of the 95910-F6300 work?

You have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit. Create the repair order online, then pack the unit and send it. At Airbag24, processing usually takes 3–4 working days.

The order ensures that the unit is no longer active before removal. Airbag24 tests the control unit on the test bench, replaces defective components, erases crash data and carries out a function test. Afterwards your own unit goes back to you.

The time frame refers only to testing, repairing and checking at Airbag24, not to your own working steps. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F6300 get to Airbag24?

You send the control unit 95910-F6300 as a parcel to Airbag24 or book a UPS collection. After the repair, UPS brings the unit back to you.

Enclose the printed repair order in the parcel and wrap the unit so that it withstands knocks.