Airbag control unit with part number 95910-F6400

What does the airbag control unit 95910-F6400 do?

The airbag control unit 95910-F6400 is the central control unit of the restraint system (SRS) in Kia vehicles. It evaluates the crash sensors and, in an impact, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

The unit checks the system continuously while the vehicle is driving and stores any faults it finds. It shows these faults via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-F6400 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

An ordinary diagnostic tool cannot remove this crash data, so the control unit remains conspicuous. Airbag24 erases the data during the repair.

The other triggers creep in gradually. A component ages, a solder joint goes cold, and moisture finds its way into a connector. Voltage spikes, for example from a weak battery or a jump start, can also stress the electronics.

How can you tell that the 95910-F6400 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently. In addition, there is an error message in the instrument cluster, no connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared.

The warning light is a clear warning from the system. Have the display checked promptly, even if the vehicle otherwise runs normally in everyday use.

In an emergency, airbags and seatbelt pretensioners may not be triggered. A warning of this kind must therefore be taken seriously.

Which vehicles is the 95910-F6400 fitted in?

The 95910-F6400 is fitted in these vehicles: Kia Cadenza VG (2009-2016).

The following list shows the vehicles assigned to this part number.

• Kia Cadenza VG (2009-2016)

Two points matter before removal. Comparing the part number on the label of the unit with this page only shows that it is the right unit. Whether the control unit is defective, or whether a plug or cable is causing the problem, is established only by the fault memory you have read out in advance.

For the same vehicles, we also repair control units with the part numbers 95910F6500.

How does the repair of the 95910-F6400 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit and create a repair order online. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. After that, your own unit goes back to you.

The sequence is fixed for safety reasons: the control unit is only removed after the battery has been disconnected.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F6400 get to Airbag24?

You send the unit as a parcel or, for an extra charge, book a UPS collection. After the repair, UPS brings it back to you.

Put the printed repair order in the parcel and pack the control unit shock-proof.