Airbag control unit with part number 95910-F8110

What does the airbag control unit 95910-F8110 do?

The airbag control unit 95910-F8110 coordinates the restraint system (SRS) in Hyundai. From the signals of the crash sensors it determines within milliseconds which airbags and seatbelt pretensioners fire.

In addition it checks the system continuously for faults and signals them via the airbag warning light.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-F8110 fail?

Crash data remaining in memory after an accident is the most common cause on the 95910-F8110, even if no airbag has triggered. An ordinary diagnostic tool cannot delete it, and aged components, cold solder joints, moisture on plug connections or voltage spikes are also possible.

The memory records the event, regardless of whether the airbags actually triggered.

Apart from that, electronic components age, solder joints can become cold and corrosion attacks plugs. Voltage spikes from a weak battery or from jump-starting additionally stress the electronics.

How can you tell that the 95910-F8110 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently as soon as the system reports a fault. Accompanying this, a fault message appears on the 95910-F8110, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

In an emergency airbags and seatbelt pretensioners may then possibly fail to deploy. Therefore do not ignore the display.

The light shows the state of the system visibly, and this hint deserves prompt clarification.

Which vehicles is the 95910-F8110 fitted in?

Whether your vehicle matches this part number, check against the vehicle list on this page. The control unit 95910-F8110 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

These vehicles are known to us with this part number:

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page. This only makes sure that you have the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-F8110 work?

For the 95910-F8110, first have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit.

Then create a repair order online and pack the unit well before sending it in.

Airbag24 checks the unit on the test bench, repairs defective components, deletes the stored crash data and carries out a function test. Processing takes 3–4 working days. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F8110 get to Airbag24?

You send the control unit 95910-F8110 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends it to you by UPS.

Place the printed repair order in the parcel and pack the control unit 95910-F8110 shock-proof.