Airbag control unit with part number 95910-F8800

What does the airbag control unit 95910-F8800 do?

For Hyundai, the airbag control unit 95910-F8800 is responsible for the restraint system (SRS). It evaluates the crash sensors and determines within milliseconds in an accident which airbags and seatbelt pretensioners are triggered.

It checks the system continuously and shows any faults it detects via the airbag warning light.

After an accident, the unit stores crash data and then locks itself.

Why does the control unit 95910-F8800 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; an ordinary diagnostic tool cannot erase it. In addition, aged components, cold solder joints, moisture and corrosion, and voltage spikes come into consideration for the control unit 95910-F8800.

Airbag24 erases the crash data as part of the repair. The other causes must be checked on the unit, because they cannot be reliably identified from the outside.

Typical examples of further causes:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-F8800 is defective?

A defect in the control unit 95910-F8800 shows up as the airbag warning light in the instrument cluster, which lights up continuously or intermittently. Accompanying signs include an error message, a missing connection to the diagnostic tool and a fault memory that cannot be cleared; in that case, airbags and seatbelt pretensioners may fail to deploy in a real emergency.

An error message in the instrument cluster is only part of the picture. What matters is what the fault memory shows, and you should have it read out promptly.

A warning light that goes out again from time to time also deserves attention, because the unit may have stored the fault.

Which vehicles is the 95910-F8800 fitted in?

The control unit 95910-F8800 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020). This information is based on the part number.

The list below shows the vehicles assigned to this part number.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page to be sure it is the correct unit. Also have the fault memory read out in advance, because only it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-F8800 work?

Have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit 95910-F8800. Create a repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24, the unit is examined on the test bench, defective components are replaced on the unit, crash data is deleted and a function test is carried out. Your own unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F8800 get to Airbag24?

You send the control unit 95910-F8800 as a parcel to Airbag24, or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

The printed repair order goes into the parcel, and the unit should be packed shock-proof.