Airbag control unit with part number 95910-F9200

What does the airbag control unit 95910-F9200 do?

The airbag control unit 95910-F9200 coordinates the restraint system (SRS) of Hyundai. It evaluates the signals from the crash sensors, decides in a collision within split seconds whether the airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It reports faults via the airbag warning light.

During driving, the unit constantly checks whether the sensors, seatbelt pretensioners and airbags are properly connected. If it detects a deviation, it records it in the fault memory.

After an accident, the control unit stores crash data and locks itself. The lock is only lifted by a repair.

Why does the control unit 95910-F9200 fail?

Most often the cause is crash data stored after an accident, even if no airbag has deployed, and a normal diagnostic tool cannot erase it. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data is created as soon as the unit registers an impact. It stays in memory even if no airbag has fired, and it cannot be removed with a normal diagnostic tool.

The remaining causes lie in the electronics themselves. Components age, solder joints can become cold, and moisture or corrosion impairs the contact at the plug connections.

Voltage spikes, for example with a weak battery or during a jump start, put additional strain on the unit.

How can you tell that the 95910-F9200 is defective?

Typical signs are an airbag warning light that stays on permanently or intermittently, a fault message in the instrument cluster, a diagnostic tool with no connection to the control unit, and a fault memory that cannot be cleared. In an emergency, the airbags and seatbelt pretensioners may then fail to deploy.

The following signs indicate a fault:

• Airbag warning light stays on permanently
• Airbag warning light comes on intermittently
• Fault message in the instrument cluster
• Diagnostic tool finds no connection
• Fault memory cannot be cleared

If any of these signs appear, have the system checked promptly.

Which vehicles is the 95910-F9200 fitted in?

The airbag control unit 95910-F9200 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The vehicles in which this part number occurs are listed here:

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page; this only establishes that it is the correct unit. Whether the control unit is defective or a connector or cable is the cause can only be determined by the fault memory read out in advance.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-F9200 work?

First, have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Next, create a repair order online and send in the well-packed unit. At Airbag24, processing usually takes 3–4 working days.

At Airbag24, the unit is first checked, then defective components are repaired. Airbag24 then erases the stored crash data and carries out a functional test.

The unit is then returned to you. The order of removal serves safety and must be observed.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F9200 get to Airbag24?

You send the unit in as a parcel or book a UPS collection for an extra charge. Airbag24 returns it via UPS after the repair.

Place the printed repair order in the parcel and pack the unit shock-proof.