Airbag control unit with part number 95910-G3000

What does the airbag control unit 95910-G3000 do?

The airbag control unit 95910-G3000 coordinates the restraint system (SRS) of Hyundai in the vehicle. It evaluates the signals from the crash sensors and decides in an accident which airbags and seatbelt pretensioners are triggered. It also monitors the system continuously. After an accident it stores crash data and locks itself.

The unit indicates faults via the airbag warning light. To do this it constantly checks the connections and sensor values.

Besides the part number, the housing carries the manufacturer number Bosch 0285013172.

Why does the control unit 95910-G3000 fail?

The most common cause in the 95910-G3000 is stored crash data from an accident, even if no airbag was triggered. A normal diagnostic tool cannot remove this data; Airbag24 erases it during the repair. Other triggers are aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The data stays in the control unit until Airbag24 removes it during the repair. For that reason, an attempt to erase it with the diagnostic tool leads nowhere.

Aged electronic components and cold solder joints are among the causes of a failure. Moisture and corrosion attack the contacts in plug connections and lead to malfunctions.

Voltage spikes arise, for example, from a weak battery or when jump-starting. Which cause applies is shown by the test.

How can you tell that the 95910-G3000 is defective?

On the 95910-G3000, the airbag warning light in the instrument cluster is the first thing to notice when it stays on permanently or intermittently. Added to that are an error message in the instrument cluster, a diagnostic tool without connection to the control unit and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then not be triggered. Such a finding calls for a prompt check, even if the car otherwise runs normally.

While driving, the warning light is the most direct sign of a defect.

Which vehicles is the 95910-G3000 fitted in?

This control unit (95910-G3000) is fitted in these vehicles: Hyundai Elantra AD. What counts is the part number of the unit.

A list of the stored assignments appears directly below.

• Hyundai Elantra AD

First compare the part number on the label of the removed unit with this page, then you know that it is the right unit. In addition, the fault memory should be read out beforehand, because only this result reveals whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-G3000 work?

For the 95910-G3000, start by having the fault memory read out and enclose the log. Then disconnect the battery, only then remove the control unit, and create a repair order online. Next, pack the unit and send it in. At Airbag24, testing, repairing and checking usually takes 3–4 working days.

At Airbag24 the unit is checked, defective components are repaired, the crash data is deleted and a function test is run. Afterwards your own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G3000 get to Airbag24?

You send the control unit 95910-G3000 by parcel or book a UPS collection for an extra charge. The repaired unit is returned by UPS.

The printed repair order belongs in the parcel; the unit needs shock-proof packaging.