Airbag control unit with part number 95910-G3001

What does the airbag control unit 95910-G3001 do?

The airbag control unit 95910-G3001 belongs to the restraint system (SRS) of Hyundai. It evaluates the crash sensors, decides in an accident whether airbags and seatbelt pretensioners are triggered, and monitors the system continuously.

The decision is made within milliseconds, and the unit shows faults via the airbag warning light.

After an accident, it stores crash data and locks itself. The manufacturer's part number Bosch 0285014239 is also printed on the housing.

Why does the control unit 95910-G3001 fail?

The most common cause is crash data stored after an accident, even without an airbag being triggered; a normal diagnostic tool cannot erase it. Other causes are ageing electronics, cold solder joints, moisture and corrosion, and voltage spikes.

• Ageing electronic components
• Cold solder joints
• Moisture and corrosion at plug connectors
• Voltage spikes, for example from a weak battery or a jump start

The crash data remains in the unit, and the erase attempt with a standard diagnostic tool fails.

How can you tell that the 95910-G3001 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently. Added to this are a fault message in the instrument cluster, a missing connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger. The warning light makes the defect visible, which is exactly why it is worth following up.

Which vehicles is the 95910-G3001 fitted in?

The airbag control unit 95910-G3001 is fitted in these vehicles: Hyundai Elantra AD. Whether it suits your own car is only shown by comparing it with this list.

The assignment in detail can be seen here.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page; this only confirms that it is the right unit. Also have the fault memory read out, because the log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-G3001 work?

You first have the fault memory read out and attach the log. Then you disconnect the battery, remove the control unit 95910-G3001 and create a repair order online. Afterwards, you send the unit in, well packed.

The order is fixed for safety reasons, and disconnecting the battery comes before removal.

Airbag24 tests the unit on the test bench, repairs defective components, deletes the stored crash data and carries out a function test. Testing, repair and the test take 3–4 working days as a rule. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G3001 get to Airbag24?

You send the control unit 95910-G3001 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends your own unit back to you by UPS.

Put the printed repair order in the parcel and pack the unit shockproof.