Airbag control unit with part number 95910-G4110

What does the airbag control unit 95910-G4110 do?

The airbag control unit 95910-G4110 is responsible for the restraint system (SRS) of Hyundai. In a crash it decides within milliseconds which airbags and seatbelt pretensioners are triggered, and it monitors the system continuously.

A fault in the system is shown via the airbag warning light in the instrument cluster. In this way the driver recognises that something is wrong in the restraint system and can act.

After a crash the unit stores crash data and locks itself. Following an accident, a check of the control unit is therefore advisable.

Why does the control unit 95910-G4110 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; a normal diagnostic tool does not erase it. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes.

Crash data remains in the unit regardless of whether an airbag has triggered. It cannot be removed with an ordinary diagnostic tool, and that is exactly what can lead to a fault that cannot be fixed without repairing the unit.

The other causes lie in the electronics and their surroundings. Components age, solder joints can be cold, and moisture attacks plug connectors. Voltage spikes, for example from a weak battery or a jump start, additionally stress the unit.

How can you tell that the 95910-G4110 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. In addition, a fault message may appear in the instrument cluster, the diagnostic tool may have no connection to the control unit, and a fault memory may occur that cannot be cleared.

• The airbag warning light lights up permanently or intermittently.
• A fault message appears in the instrument cluster.
• The diagnostic tool finds no connection to the control unit.
• The fault memory cannot be cleared.

In that case airbags and seatbelt pretensioners may not trigger in an emergency. Have the system checked promptly.

Which vehicles is the 95910-G4110 fitted in?

The control unit 95910-G4110 of the brand Hyundai is fitted in these vehicles: Hyundai i30 PD (2017-2020), PD 2nd Facelift (from 2024) and PD 1st Facelift (2020-2024). The safest way to check whether your car is included is via the vehicle documents.

The models in which this unit was installed are listed here:

• Hyundai i30 PD (2017-2020)
• Hyundai i30 PD 2nd Facelift (from 2024)
• Hyundai i30 PD 1st Facelift (2020-2024)

Compare above all the part number on the label of the removed unit with this page; this only confirms that it is the correct unit. Have the fault memory read out beforehand, as only the log shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 0285014249, 285013238, 95910-G3100, 95910-G3101, 95910-G4000, 95910-G4100.

How does the repair of the 95910-G4110 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit 95910-G4110 and create a repair order online.

Then pack the well-protected unit and send it in. Airbag24 checks it on the test bench, replaces defective components, erases stored crash data and runs a function test. Your own unit is then returned to you.

Processing at Airbag24 usually takes 3–4 working days. This period covers checking, repairing and testing only. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G4110 get to Airbag24?

You send the control unit as a parcel or book UPS collection for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Include the printed repair order in the parcel and pack the unit shock-proof.