Airbag control unit with part number 95910-G6000

What does the airbag control unit 95910-G6000 do?

The airbag control unit 95910-G6000 is the central component of the restraint system (SRS) in Kia. It processes the signals from the crash sensors, determines in an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It indicates faults via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

The evaluation takes place within milliseconds, so no time is lost in an emergency.

Why does the control unit 95910-G6000 fail?

The most common cause is crash data stored after an accident, even if no airbag has been triggered; a normal diagnostic tool cannot erase it. Other causes include aged electronic components, faulty solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting.

Crash data is the first point an inspection clarifies, because it belongs to every unit that is locked after an accident.

For the other causes, only the fault memory narrows down the finding.

How can you tell that the 95910-G6000 is defective?

A defect shows up as the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition there are error messages in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be erased.

These indications show that the system has detected a fault. As long as the fault persists, airbags and seatbelt pretensioners may fail to trigger in an emergency.

A finding like this therefore deserves prompt inspection before you continue to use the vehicle.

Which vehicles is the 95910-G6000 fitted in?

The control unit 95910-G6000 is fitted in these vehicles: Kia Picanto JA (from 2017).

The list here shows the vehicles we have on record for this part number.

• Kia Picanto JA (from 2017)

Comparing the label number with this page only ensures that you have the correct unit. Have the fault memory read out beforehand. It shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G6100, 95910-G6110, 95910-G6200, 95910-G6250, 95910-G6510, 95910-G6520.

How does the repair of the 95910-G6000 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Next, create a repair order online and send the unit in. Airbag24 usually needs 3–4 working days for inspection, repair and testing.

Airbag24 checks the unit on the test bench, repairs the defective components, erases the stored crash data and carries out a function test. Afterwards the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G6000 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof. Use a firm outer packaging so nothing shifts inside the carton.