Airbag control unit with part number 95910-G6050

What does the airbag control unit 95910-G6050 do?

The airbag control unit 95910-G6050 coordinates the restraint system (SRS) for Kia. It receives the messages from the crash sensors, determines in an accident within milliseconds which airbags and seatbelt pretensioners to trigger, and checks the system continuously. If it detects a fault, the airbag warning light comes on.

After an accident, the unit stores crash data and locks itself.

The control unit takes on these tasks around the clock, without you having to intervene.

Why does the control unit 95910-G6050 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronic components, faulty solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data stays in the unit until it is erased during the repair, which is why it comes first when the unit is checked. A normal diagnostic tool cannot remove it.

The other causes can occur individually or together. Which of them applies to your unit is shown only by the read-out fault memory.

How can you tell that the 95910-G6050 is defective?

A defect shows up first as the airbag warning light in the instrument cluster. It lights up permanently or intermittently, and error messages also appear in the instrument cluster.

• Airbag warning light lights up permanently
• Airbag warning light lights up intermittently
• Error message in the instrument cluster
• Diagnostic tool gets no connection to the control unit
• Fault memory cannot be erased

In an emergency, airbags and seatbelt pretensioners may fail to trigger if the finding persists. The warning light indicates it in good time, so take this display seriously.

Which vehicles is the 95910-G6050 fitted in?

The control unit 95910-G6050 is fitted in these vehicles: Kia Picanto JA (from 2017).

The vehicles we have on record for this part number are listed below.

• Kia Picanto JA (from 2017)

Comparing the label with this page confirms only that you have the correct unit. Therefore also have the fault memory read out, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G6100, 95910-G6110, 95910-G6200, 95910-G6250, 95910-G6510, 95910-G6520.

How does the repair of the 95910-G6050 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only afterwards remove the control unit. Next, create a repair order online and send the unit in well packed.

Airbag24 checks your control unit on the test bench, repairs the defective components, erases the stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G6050 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. Airbag24 returns the unit to you by UPS after the repair.

You put the printed repair order into the parcel, and pack the unit shock-proof. Make sure the carton is firmly closed before it is collected.