Airbag control unit with part number 95910-G7000

What does the airbag control unit 95910-G7000 do?

The airbag control unit 95910-G7000 is the central unit of the SRS on Hyundai. It evaluates sensors that detect impacts and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

A self-test and continuous monitoring are part of this; faults appear on the airbag warning light.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-G7000 fail?

The most common reason is crash data that is stored in the 95910-G7000 after an accident, even if no airbag was triggered. Aged components, moisture and voltage spikes also come into consideration.

This data stays in the unit until the repair. Airbag24 deletes it there.

The other causes at a glance:

• ageing of electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from jump-starting

How can you tell that the 95910-G7000 is defective?

The airbag warning light indicates a defect on the 95910-G7000 as soon as it lights up permanently or intermittently. Accompanying signs can be a fault message in the instrument cluster, a missing connection to the diagnostic tool, or a fault memory that cannot be cleared.

Such signs are serious, because in an emergency airbags and seatbelt pretensioners may fail to trigger.

Which vehicles is the 95910-G7000 fitted in?

The list shows whether your model is affected. The 95910-G7000 is fitted in these vehicles: Hyundai Ioniq AE Facelift (2019-2022) and AE (2016-2019).

Here is the list of vehicles:

• Hyundai Ioniq AE Facelift (2019-2022)
• Hyundai Ioniq AE (2016-2019)

Comparing the part number on the unit with this page only ensures that you have the right unit in front of you. Having the fault memory read out beforehand, by contrast, shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G2000, 95910-G2400, 95910-G2500, 95910-G7400, G7959-10400.

How does the repair of the 95910-G7000 work?

With the 95910-G7000, first have the fault memory read out and enclose the log, then disconnect the battery, remove the control unit, create a repair order online and send it in. For checking, repair and testing at Airbag24, allow 3–4 working days as a rule.

First Airbag24 checks the electronics, then defective components are repaired, the crash data is removed and the function is tested. Then the unit is sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G7000 get to Airbag24?

The control unit 95910-G7000 reaches Airbag24 either as a parcel, or you book a UPS collection for an extra charge. Airbag24 returns the unit to you by UPS after the repair.

Put the printed repair order in the parcel, and pack the unit shockproof.