Airbag control unit with part number 95910-G7050

What does the airbag control unit 95910-G7050 do?

The airbag control unit 95910-G7050 coordinates the SRS restraint system of Hyundai. It detects through the crash sensors when an impact occurs and then decides within milliseconds on airbags and seatbelt pretensioners. It also continuously monitors the system and reports faults via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

The sensor data flows into the evaluation without you having to adjust anything.

Why does the control unit 95910-G7050 fail?

The most common cause is stored crash data, even if no airbag was triggered in the accident. This data cannot be erased with a normal diagnostic tool. Other possible causes are aged electronic components, cold solder joints, moisture, corrosion at plug connections and voltage spikes.

Crash data arises from the accident itself and remains stored in the unit afterwards. At Airbag24 it is erased during the repair.

Aged components, cold solder joints and corrosion at plug connections can impair the signals and are difficult to detect from the outside.

Voltage spikes occur, for example, with a weak battery or jump-starting, and can damage the electronics.

How can you tell that the 95910-G7050 is defective?

The airbag warning light in the instrument cluster lights up constantly or at times. A fault message also appears in the instrument cluster, and the fault memory cannot be cleared.

The diagnostic tool also gets no connection to the control unit. If any of these signs appear, airbags and seatbelt pretensioners may not deploy in an emergency. Please have the system checked promptly.

Which vehicles is the 95910-G7050 fitted in?

The control unit 95910-G7050 is fitted in these vehicles: Hyundai Ioniq AE Facelift (2019-2022) and AE (2016-2019).

The vehicles in the following list are assigned to this part number.

• Hyundai Ioniq AE Facelift (2019-2022)
• Hyundai Ioniq AE (2016-2019)

Check the part number on the label of the unit and compare it with this page. This way you can be sure it is the right unit. The cause is not yet clarified by this. That is why you should have the fault memory read out, because only that shows whether the control unit is defective or a connector or cable is affected.

For the same vehicles, we also repair control units with the part numbers 95910-G2000, 95910-G2400, 95910-G2500, 95910-G7400, G7959-10400.

How does the repair of the 95910-G7050 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit 95910-G7050 and create the repair order online. Then pack and send the unit.

At Airbag24 the team checks the unit on the test bench and replaces defective components. It then erases stored crash data and carries out a function test. Processing usually takes 3–4 working days.

Afterwards your own unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G7050 get to Airbag24?

You send the unit as a parcel or, for an extra charge, book a UPS collection. After the repair Airbag24 returns it to you by UPS.

The printed repair order goes in the parcel, and the unit must be packed shockproof.