Airbag control unit with part number 95910-G7300

What does the airbag control unit 95910-G7300 do?

The airbag control unit 95910-G7300 controls the restraint system (SRS) in vehicles from Hyundai. In an impact it evaluates the crash sensors and determines within milliseconds which airbags and seatbelt pretensioners are triggered. While driving, it monitors the entire system and reports faults via the airbag warning light.

Most of the time the unit works in the background, checking the supply voltage, the connections and the connected components.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-G7300 fail?

The most common cause is stored crash data that arises after an accident, even if no airbag has triggered; a normal diagnostic tool cannot erase it. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes from a weak battery or jump-starting. Airbag24 erases the crash data during the repair.

The memory entry stands on its own and remains until the repair removes it.

The other causes compound one another: electronics age, solder joints become brittle, moisture attacks contacts, and the voltage fluctuates when starting.

How can you tell that the 95910-G7300 is defective?

A fault can be recognised by the airbag warning light in the instrument cluster, which lights up permanently or intermittently. A fault message in the instrument cluster, a missing diagnostic connection or a fault memory that cannot be erased also point to it. Then airbags and seatbelt pretensioners may not trigger in an emergency.

• Airbag warning light in the instrument cluster lights up permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be erased

The light is the indication the system gives itself. Which cause lies behind it is shown only by reading out the fault memory.

Which vehicles is the 95910-G7300 fitted in?

The airbag control unit 95910-G7300 is fitted in these vehicles: Hyundai Ioniq AE Facelift (2019-2022) and AE (2016-2019).

The overview lists the vehicles recorded for this part number.

• Hyundai Ioniq AE Facelift (2019-2022)
• Hyundai Ioniq AE (2016-2019)

Compare the number on the label of the removed unit with this page. That ensures that it is the correct unit. Have the fault memory read out, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G2000, 95910-G2400, 95910-G2500, 95910-G7400, G7959-10400.

How does the repair of the 95910-G7300 work?

Processing at Airbag24 usually takes 3–4 working days. Beforehand, have the fault memory read out and attach the log, disconnect the battery and remove the control unit only afterwards. Then create the repair order online and send in the unit.

Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. The unit is then sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G7300 get to Airbag24?

You send the unit to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns it to you by UPS.

The printed repair order goes into the parcel, and the unit is packed so that it is shock-resistant.