Airbag control unit with part number 95910-G7500

What does the airbag control unit 95910-G7500 do?

The airbag control unit 95910-G7500 controls the restraint system (SRS) for Hyundai. It continuously checks the sensors, evaluates their signals in an impact and triggers the appropriate airbags and seatbelt pretensioners within milliseconds. After an accident it stores crash data and locks itself.

The control unit reports faults in the system via the airbag warning light in the instrument cluster, so that you notice a fault quickly.

The unit works without any action by the driver. Its task is narrowly limited: evaluating the sensors and controlling the restraint devices.

Why does the control unit 95910-G7500 fail?

The most common cause is stored crash data from an accident, even if no airbag has triggered; a normal diagnostic tool cannot delete it. Other causes are ageing components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, for example from a weak battery or a jump-start.

Crash data arise from an impact and remain in the unit afterwards, even if no airbag was triggered. A standard workshop diagnostic tool cannot remove them. Airbag24 deletes the crash data during the repair.

The other causes stem from ageing, soldering faults, moisture and voltage. They mainly affect plugs and circuit boards inside the unit.

How can you tell that the 95910-G7500 is defective?

A defect shows itself through the airbag warning light in the instrument cluster, which stays on permanently or intermittently, and through an error message in the instrument cluster. In addition, the diagnostic tool cannot establish a connection to the control unit, or the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The signs in detail:

• Airbag warning light in the instrument cluster, permanently or intermittently
• Error message in the instrument cluster
• No connection from the diagnostic tool to the control unit
• Fault memory cannot be cleared

The warning light is the clearest indication the unit gives itself. If it stays on or lights up intermittently, have the fault memory read out, because only that shows the cause.

Which vehicles is the 95910-G7500 fitted in?

The control unit 95910-G7500 is fitted in these vehicles: Hyundai Ioniq AE Facelift (2019-2022) and AE (2016-2019). You can check whether your vehicle is included by comparing make and model with the list.

This overview shows the vehicles in which this control unit was fitted.

• Hyundai Ioniq AE Facelift (2019-2022)
• Hyundai Ioniq AE (2016-2019)

On the one hand, compare the part number on the label of the removed unit with this page; that shows whether it is the right unit. On the other hand, have the fault memory read out beforehand. Only this log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G2000, 95910-G2400, 95910-G2500, 95910-G7400, G7959-10400.

How does the repair of the 95910-G7500 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. After that, create a repair order online and send in the unit well-packed.

This order is binding for safety reasons. Reading out comes before disconnecting the battery, and disconnecting comes before removal.

Airbag24 checks the unit on the test bench, repairs defective components, deletes stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days. Afterwards the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G7500 get to Airbag24?

You send the control unit 95910-G7500 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.