Airbag control unit with part number 95910-GI000

What does the airbag control unit 95910-GI000 do?

The airbag control unit 95910-GI000 forms the central unit of the SRS restraint system in Hyundai vehicles. It processes the sensor data in a crash, decides within milliseconds whether to trigger, and checks the system during operation.

If it detects a fault, it reports this via the airbag warning light in the instrument cluster. This way, the driver learns that the system is not in order before it matters.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-GI000 fail?

The most common cause with the 95910-GI000 is crash data stored after an accident, even without an airbag having deployed. Ordinary diagnostic tools cannot delete it; Airbag24 deletes it during the repair. Other causes are aged components, cold solder joints, moisture at plug connections and voltage spikes.

Crash data are created because the unit records the impact, and they remain stored even if the vehicle continues to drive normally afterwards.

The other causes at a glance:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

Which of these causes applies in an individual case can only be determined by an inspection.

How can you tell that the 95910-GI000 is defective?

A defect in the 95910-GI000 shows up as the airbag warning light, an error message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Typical signs at a glance:

• The airbag warning light stays on permanently.
• The warning light comes on intermittently and then goes out again.
• An error message appears in the instrument cluster.
• The diagnostic tool cannot reach the control unit.
• The fault memory cannot be cleared.

If you notice these signs, have the fault memory read out. The log provides more information than the light alone.

Which vehicles is the 95910-GI000 fitted in?

The 95910-GI000 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The following models use this control unit:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Check the label on the removed unit: if the number matches this page, you have the right unit in front of you. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI000 work?

First have the fault memory read out, enclose the log and disconnect the battery; only then remove the 95910-GI000. Create a repair order online and send in the unit, packed well. Processing at Airbag24 usually takes 3–4 working days.

On the test bench, Airbag24 examines your unit, replaces defective components and deletes stored crash data. A function test follows, and your own unit is returned to you.

The sequence of the first steps matters, because it serves safety. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI000 get to Airbag24?

You can send the 95910-GI000 as a parcel, or book a UPS collection for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Enclose the printed repair order with the parcel, and pack the unit shock-proof.