Airbag control unit with part number 95910-GI010

What does the airbag control unit 95910-GI010 do?

The airbag control unit 95910-GI010 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and decides within milliseconds in a crash which airbags and seatbelt pretensioners are triggered. If there are faults in the system, the airbag warning light comes on.

The unit checks the system continuously during operation. After an accident it stores crash data and locks itself.

Why does the control unit 95910-GI010 fail?

Most often the cause lies in crash data stored after an accident, and this also applies if no airbag deployed. A normal diagnostic tool cannot reach this data. Other triggers are aged components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes, such as from a weak battery or jump-starting.

A memory entry is not visible from outside, so only reading it out helps to assess the situation.

The other causes arise from ageing, moisture and current fluctuations and occur in everyday use.

How can you tell that the 95910-GI010 is defective?

The airbag warning light in the instrument cluster indicates a defect in control unit 95910-GI010 when it lights up permanently or intermittently. This is accompanied by an error message in the instrument cluster, a diagnostic tool with no connection to the control unit, or a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

A warning light that stays on permanently or comes on from time to time means the system has detected the fault, and it is worth having it checked promptly.

Which vehicles is the 95910-GI010 fitted in?

The list is based on our details for this part number. Control unit 95910-GI010 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The following vehicles are on record for this part number:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Comparing the part number on the label with this page confirms that the unit is the correct one. It is no proof of a cause. Have the fault memory read out before removing the unit: this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI010 work?

Airbag24 usually needs 3–4 working days for testing, repairing and checking. First have the fault memory read out and enclose the log, then disconnect the battery and remove control unit 95910-GI010. Then create a repair order online and send in the unit well packed.

First Airbag24 examines the unit, then defective components are repaired. The crash data is deleted, and the function test comes last. After that your own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI010 get to Airbag24?

You send control unit 95910-GI010 as a parcel to Airbag24, or you book a UPS collection for an extra charge. After repair, the unit goes back to you by UPS.

The printed repair order goes in the parcel; pack the control unit shock-proof.