Airbag control unit with part number 95910-GI050

What does the airbag control unit 95910-GI050 do?

The airbag control unit 95910-GI050 coordinates the airbags and seatbelt pretensioners in the vehicle of Hyundai. In an accident it processes the values from the crash sensors and decides within milliseconds whether to trigger. After an accident it stores crash data and locks itself.

In everyday use the unit works unobtrusively in the background. It monitors the entire circuit of the restraint system, and as soon as it detects a deviation, it switches on the airbag warning light in the instrument cluster.

This evaluation forms the core of the safety function. Whether an airbag or a seatbelt pretensioner responds in a collision depends on the course of the deceleration. The control unit makes this decision itself, without any intervention from the driver.

Why does the control unit 95910-GI050 fail?

Stored crash data is the most common cause of a failure, even if no airbag has deployed; a normal diagnostic tool cannot erase it. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes from the vehicle electrical system.

An impact can leave crash data behind without an airbag or seatbelt pretensioner actually triggering. These entries remain in the unit, and reading them out with an ordinary tool does not change that.

The remaining causes lie in the electronics and in their connection to the vehicle electrical system. Components age, solder joints can become cold, and moisture worsens the contacts. Voltage spikes, for example from a weak battery or a jump start, put additional strain on the circuits.

How can you tell that the 95910-GI050 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. In addition, a fault message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

When the warning light comes on, that is the clearest indication of a fault in the restraint system. It shows the fault as soon as the control unit detects it, and that is exactly what it is installed for.

The diagnostic tool is the second check: if no connection can be established, the fault memory cannot be read. In an emergency, airbags and seatbelt pretensioners may then fail to trigger. Please have the cause clarified promptly.

Which vehicles is the 95910-GI050 fitted in?

The airbag control unit 95910-GI050 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The list below shows the vehicles for this part number.

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Two steps make sense before removal. Compare the number on the unit's label with this page. This only establishes that you have the right unit, nothing more. Have the fault memory read beforehand, because only that result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI050 work?

At Airbag24, testing, repair and function test usually take 3–4 working days. You carry out the steps before that yourself, starting with the fault memory.

Before removal, have the fault memory read and enclose the log with the unit. Disconnect the battery; only then take the control unit out. You create the repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, repairs the defective components, deletes stored crash data and tests the function. Afterwards the unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI050 get to Airbag24?

You send the unit as a parcel, or you book a UPS pickup for an extra charge. The return after repair is also handled by Airbag24 with UPS.

Enclose the printed repair order with the parcel. Please pack the unit shock-resistant.