Airbag control unit with part number 95910-GI150

What does the airbag control unit 95910-GI150 do?

The airbag control unit 95910-GI150 coordinates the restraint system (SRS) in Hyundai. It evaluates the crash sensors, decides on the triggering of airbags and seatbelt pretensioners within milliseconds in an accident, and monitors the system continuously.

If it detects a fault, it shows this via the airbag warning light in the instrument cluster. This tells you as the driver that something in the system is not right.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-GI150 fail?

The most common cause for the 95910-GI150 is crash data stored after an accident, even if no airbag has triggered. Added to this are aged electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes from weak batteries or jump-starting.

Crash data cannot be deleted with a normal diagnostic tool. That is exactly why the fault remains until the data has been removed from the unit.

The other causes concern the electronics and the connections inside the control unit. Which of them applies in the specific case can only be shown by inspecting the unit.

How can you tell that the 95910-GI150 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-GI150 permanently or intermittently. In addition, the instrument cluster shows error messages, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

While these signs persist, airbags and seatbelt pretensioners may not trigger in an emergency. Take the warning seriously and have the vehicle checked.

The light is among the first signs you notice as a driver, and it is the most visible indication of a defect.

Which vehicles is the 95910-GI150 fitted in?

The 95910-GI150 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The list shows which vehicles are stored for this part number:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

You can compare the part number on the label of the removed unit with this page. This only confirms that it is the right unit. Also have the fault memory read out, because only this result shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI150 work?

At Airbag24, the check, repair and function test of the 95910-GI150 usually take 3–4 working days. This processing time applies only to the work in our workshop.

First have the fault memory read out and enclose the log. Then disconnect the battery. Only then remove the control unit, create a repair order online and pack the unit well.

Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI150 get to Airbag24?

Either you send the 95910-GI150 as a parcel to Airbag24, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns your own unit by UPS.

The printed repair order goes into the parcel, and the control unit must be packed shock-proof.