Airbag control unit with part number 95910-GI200

What does the airbag control unit 95910-GI200 do?

Within the restraint system (SRS) of Hyundai, the airbag control unit 95910-GI200 is in control. It evaluates the sensors, calculates in a crash within milliseconds the triggering of airbags and seatbelt pretensioners, and checks the entire system continuously. Detected faults are indicated via the airbag warning light. After a crash it stores crash data and locks itself.

The checking covers wiring, power supply and connections to the components. Detected deviations go into the fault memory, from where they can be read out later.

Because triggering and monitoring are in one unit, it forms the core of the safety electronics.

Why does the control unit 95910-GI200 fail?

The most common cause is crash data from an accident, even if no airbag has been triggered; a normal diagnostic tool does not erase it. Further causes are aged components, cold solder joints, moisture and corrosion on connectors, and voltage spikes from a weak battery or a jump start.

The crash data indicate a registered event, not automatically damage. The cause can only be narrowed down via the fault memory.

The other causes develop gradually: solder joints fatigue, and moisture attacks contacts until transition resistances rise.

How can you tell that the 95910-GI200 is defective?

The airbag warning light in the instrument cluster shows the defect by lighting up permanently or intermittently. Added to this are a fault message in the instrument cluster, a diagnostic tool without connection to the control unit, and a fault memory that cannot be cleared.

The light is the most direct hint the vehicle gives. It comes on as soon as the control unit has detected a fault in the restraint system. Anyone who ignores it forgoes the early warning.

A fault in the system can mean that airbags and seatbelt pretensioners may possibly fail to deploy in an emergency. A prompt check is therefore advisable.

Which vehicles is the 95910-GI200 fitted in?

The 95910-GI200 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

Which vehicles this concerns in detail is shown by this overview:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Compare the part number on the unit with the information on this page. That way you make sure you are removing the right control unit. Whether it is actually defective, however, is shown only by the fault memory read-out, because a plug or a cable may also be the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI200 work?

At the start comes the fault memory read-out, and you add the log to the order. Only then disconnect the battery and remove the control unit. You create the repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the unit is checked on the test bench, the defective spots are fixed, and the crash data in the memory are erased. Finally a function test runs.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI200 get to Airbag24?

Either you pack the unit and hand it in as a parcel, or you arrange a UPS collection for an extra charge. UPS handles the return journey after the repair.

Enclose the printed repair order in the consignment. Pack the unit shock-resistant.