Airbag control unit with part number 95910-GI210

What does the airbag control unit 95910-GI210 do?

The airbag control unit 95910-GI210 forms the central control unit of the restraint system (SRS) for Hyundai. It processes the data from the crash sensors, decides within milliseconds in a crash whether the airbags and seatbelt pretensioners are triggered, and monitors the system permanently. It indicates faults via the airbag warning light.

Monitoring runs in the background during operation, regardless of whether you are driving. After a crash, the control unit creates crash data and locks itself. The lock only ends with the repair.

Precisely because the unit carries so much responsibility, its condition deserves a close look.

Why does the control unit 95910-GI210 fail?

The most common cause is crash data stored after an accident, even if no airbag was deployed; a normal diagnostic tool cannot erase it. Other possible causes include aged electronic components, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data is stored in the unit's memory until it is erased.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from jump-starting

The list names the further possibilities without fixing any one of them as the cause.

How can you tell that the 95910-GI210 is defective?

On the vehicle, you recognise a defect by the airbag warning light in the instrument cluster when it lights up permanently or intermittently. A fault message in the instrument cluster, a diagnostic tool without connection or a fault memory that cannot be cleared also belong to this. In an emergency, airbags and seatbelt pretensioners may then not deploy.

If the light is on, do not leave the vehicle unattended. Have it checked promptly if you find a fault.

A fault message in the instrument cluster is therefore a separate indication and not a mere accompanying symptom.

Which vehicles is the 95910-GI210 fitted in?

A look at the vehicle registration document is enough for the check. The control unit 95910-GI210 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

Our records list the following vehicles for this part number:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

You compare the part number on the label of the removed unit with this page. This ensures that it is the correct unit; the comparison says nothing more. The fault memory should be read out beforehand, because only this result shows whether the control unit itself is the cause or a plug or cable is.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI210 work?

You have the fault memory read out first, so that the log is enclosed with the order. Only then do you disconnect the battery and remove the control unit 95910-GI210. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a functional test. Your own unit is then returned to you. You create the repair order online and send the unit in well packed.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI210 get to Airbag24?

You send the control unit 95910-GI210 as a parcel to Airbag24 or book a UPS collection for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Pack the printed repair order in with it and pack the control unit shockproof.