Airbag control unit with part number 95910-GI310

What does the airbag control unit 95910-GI310 do?

The airbag control unit 95910-GI310 is the central control unit of the restraint system (SRS) in Hyundai. It processes the signals from the crash sensors, decides within milliseconds in a crash whether airbags and seatbelt pretensioners are triggered, and continuously monitors the system.

It shows faults via the airbag warning light in the instrument cluster. After an accident, it stores crash data and locks itself.

Monitoring runs continuously while the vehicle is powered on.

Why does the control unit 95910-GI310 fail?

The most common cause of a 95910-GI310 failure is crash data stored after an accident, even if no airbag was deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

Crash data is the stored trace of a load, and a normal diagnostic tool cannot erase it. The other causes concern the electronics and their contacts.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery or a jump start

Which of these causes applies in an individual case only becomes clear when the unit is tested.

How can you tell that the 95910-GI310 is defective?

A defect in the 95910-GI310 shows up as the airbag warning light staying on permanently or intermittently, and as a fault message in the instrument cluster.

• The diagnostic tool cannot connect to the control unit
• The fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may not trigger if such a finding is present. If you notice any of these signs, have the system checked promptly.

Which vehicles is the 95910-GI310 fitted in?

The control unit 95910-GI310 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The list shows the vehicles recorded in our data for this part number:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Compare the part number on the label of the removed unit with this page. This only confirms that you have the right unit. Have the fault memory read out beforehand, because only that result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI310 work?

First have the fault memory read out and attach the log, then disconnect the battery and only then remove the 95910-GI310. Afterwards create the repair order online and send in the well-packed unit. Airbag24 tests it on the test bench, repairs defective components, erases stored crash data and carries out a function test, after which your own unit is returned. Processing at Airbag24 usually takes 3–4 working days.

The log supports the test, because it records the stored faults.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI310 get to Airbag24?

You send the control unit 95910-GI310 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-resistant.