Airbag control unit with part number 95910-GI700

What does the airbag control unit 95910-GI700 do?

The airbag control unit 95910-GI700 controls the restraint system (SRS) of Hyundai. It evaluates the signals from the crash sensors and, in an emergency, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

Besides this, the unit monitors the entire system continuously. If it detects a fault, it shows it via the airbag warning light in the instrument cluster, so that the problem becomes visible.

After an accident the control unit stores crash data and locks itself.

Why does the control unit 95910-GI700 fail?

Stored crash data from an accident is the most common cause, even if no airbag was triggered. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, such as those arising from a weak battery or a jump start.

Crash data cannot be deleted with a normal diagnostic tool. Airbag24 takes on this step as part of the repair.

Aged components, cold solder joints and moisture act on the electronics over time. Voltage spikes additionally put strain on them and can damage individual components.

How can you tell that the 95910-GI700 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. Alongside it, a fault message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then be unable to deploy.

If the warning light stays on permanently, have the vehicle checked promptly, because the light indicates that something is wrong in the restraint system.

Which vehicles is the 95910-GI700 fitted in?

The 95910-GI700 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The vehicles for this part number are listed individually below.

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Compare the part number on the label of the removed unit with this page. That only confirms that it is the correct unit, nothing more. Also have the fault memory read before you remove the control unit, because only this result shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-GI700 work?

First have the fault memory read, attach the log and then disconnect the battery; only then remove the control unit. Online, create a repair order and send the well-packed unit in. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the unit is examined on the test bench. Defective components are replaced, stored crash data is deleted and a function test is carried out. You then receive your own, repaired unit back.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-GI700 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the control unit shockproof before shipping begins.