Airbag control unit with part number 95910-H0130

What does the airbag control unit 95910-H0130 do?

The airbag control unit 95910-H0130 is the central control unit of the restraint system (SRS) in vehicles from Kia. It evaluates the signals from the crash sensors and decides in an accident, within milliseconds, which airbags and seatbelt pretensioners are triggered.

In addition it monitors the entire system during operation. If it detects a fault, it shows this via the airbag warning light in the instrument cluster.

After an accident the control unit stores crash data and locks itself. The next section explains what this means in practice.

Why does the control unit 95910-H0130 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example with a weak battery or jump-starting.

Crash data arises as soon as the control unit registers an accident. It remains in memory even if no airbag was triggered in this vehicle. Airbag24 deletes it during the repair.

Components also fail without an accident. Electronics age, solder joints can go cold, and moisture causes corrosion at plug connections.

Voltage spikes arise, for example, when the battery is weak or the vehicle is started with jump leads. Such loads act directly on the electronics.

How can you tell that the 95910-H0130 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, and an error message appears in the instrument cluster. The diagnostic tool finds no connection to the control unit, or the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

The warning light gives the finding itself, so a glance at the instrument cluster is enough. A fault therefore shows up there, and the warning light makes it visible.

Anyone who takes the warning seriously has the vehicle checked promptly.

Which vehicles is the 95910-H0130 fitted in?

The control unit 95910-H0130 is fitted in these vehicles: Kia Rio YB (from 2017).

The vehicles at a glance:

• Kia Rio YB (from 2017)

Compare the part number on the label of the removed unit with this page. This only shows that you have the right unit in front of you. Read out the fault memory before removal, because this log alone shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-H8210, 95910-H8330, 95910H9430.

How does the repair of the 95910-H0130 work?

First have the fault memory read out and attach the log, then disconnect the battery and only then remove the control unit. Then create a repair order online and send in the well-packed unit. Airbag24 checks it on the test bench, repairs defective components, deletes stored crash data and carries out a function test.

The sequence is mandatory for safety reasons, which is why the read-out comes before removal. Checking, repairing and testing at Airbag24 usually take 3–4 working days.

Afterwards your own unit is sent back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H0130 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns the control unit to you by UPS.

Put the printed repair order into the parcel and pack the control unit shock-proof.