Airbag control unit with part number 95910-H2000

What does the airbag control unit 95910-H2000 do?

The airbag control unit 95910-H2000 controls the restraint system in the Kia. It processes the signals from the crash sensors and, in an accident, triggers the appropriate airbags and seatbelt pretensioners within milliseconds.

During operation, the unit monitors the entire system. If it detects a fault, it shows this via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and locks itself. The crash data remains stored in the unit, and Airbag24 removes it during the repair.

Why does the control unit 95910-H2000 fail?

Stored crash data after an accident is the most common cause, even if no airbag has deployed. A normal diagnostic tool cannot erase this data. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, for example from a weak battery or a jump start.

Aged components gradually lose their reliability. Solder joints can go cold, and moisture causes corrosion on the contacts.

Voltage spikes enter the unit via the power supply and can cause damage there.

How can you tell that the 95910-H2000 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently. A fault message in the instrument cluster accompanies it.

The diagnostic tool does not get a connection to the control unit, and the fault memory cannot be cleared. If these signs occur together, airbags and seatbelt pretensioners may not trigger in an emergency.

Which vehicles is the 95910-H2000 fitted in?

The control unit 95910-H2000 is fitted in these vehicles: Kia Niro DE (2016-2022).

The assigned vehicles are listed here:

• Kia Niro DE (2016-2022)

Comparing the part number on the label with this page only confirms that it is the correct unit. Whether the control unit is defective or a cable causes the fault is shown only by reading out the fault memory. Have it read out in advance.

For the same vehicles, we also repair control units with the part numbers 95910-A0200, 95910-G5000, 95910-Q4000, 95910-Q4959.

How does the repair of the 95910-H2000 work?

Have the fault memory read out and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Create the repair order online, pack the unit well and send it in. Airbag24 examines the unit on the test bench, renews defective components where necessary, erases the crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

After that, your own unit is returned to you. This time frame covers only checking, repairing and testing with us.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H2000 get to Airbag24?

You send the unit in as a parcel, or you book a UPS collection for an extra charge. UPS handles the return shipment after Airbag24 has completed the repair. You enclose the printed repair order and pack the unit shock-resistant.

Sturdy packaging material keeps the control unit in good condition throughout the entire journey.