Airbag control unit with part number 95910-H2300

What does the airbag control unit 95910-H2300 do?

In the vehicle of Kia, the airbag control unit 95910-H2300 takes over control of the restraint system (SRS). It evaluates the signals from the crash sensors and in an accident decides within a fraction of a second which airbags and seatbelt pretensioners are triggered. It also monitors the system continuously and indicates faults via the airbag warning light.

To ensure that the system works in an emergency, the control unit constantly checks its connections to sensors and triggers. If it detects a fault, it stores it in the fault memory, which a workshop or a diagnostic tool can read out.

After an accident the control unit stores crash data and locks itself.

Why does the control unit 95910-H2300 fail?

The most common cause is crash data that the control unit has stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase this data. Airbag24 erases the crash data during the repair.

Other causes are also possible, which can occur individually:

• ageing electronic components
• cold solder joints on the circuit board
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

How can you tell that the 95910-H2300 is defective?

A defect can show itself at the airbag warning light in the instrument cluster, which lights up permanently or intermittently. An error message in the instrument cluster and a diagnostic tool without a connection to the control unit are also present. If the fault memory cannot be cleared, that is a further indication.

• Airbag warning light lights up permanently
• Airbag warning light lights up intermittently
• Error message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

In this condition, the airbags and seatbelt pretensioners may not deploy in an emergency. A prompt check is therefore sensible.

Which vehicles is the 95910-H2300 fitted in?

The part number 95910-H2300 is used with Kia. The control unit 95910-H2300 is fitted in these vehicles: Kia Niro DE (2016-2022).

The vehicles that are known to us for this control unit are listed here:

• Kia Niro DE (2016-2022)

Have the fault memory read out before removal. Only then is it clear whether the control unit itself is defective or whether a plug or cable is causing the fault. Then compare the part number on the label of the removed unit with this page.

For the same vehicles, we also repair control units with the part numbers 95910-A0200, 95910-G5000, 95910-Q4000, 95910-Q4959.

How does the repair of the 95910-H2300 work?

Before removal, read out the fault memory and attach the log. Then disconnect the battery, remove the control unit, create the repair order online and pack the well-packed unit for dispatch.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a functional test. Processing at Airbag24 usually takes 3–4 working days. After that, your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H2300 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns the control unit to you by UPS.

Put the printed repair order into the parcel and pack the control unit shock-resistant.