Airbag control unit with part number 95910-H3000

What does the airbag control unit 95910-H3000 do?

The airbag control unit 95910-H3000 is the control unit of the restraint system (SRS) in Kia. It evaluates the crash sensors, determines in an accident which airbags and seatbelt pretensioners to trigger, and reports faults to the airbag warning light.

The unit checks the entire system continuously and stores any faults it finds.

After an accident, it creates crash data and locks itself.

Why does the control unit 95910-H3000 fail?

In the 95910-H3000, the most common cause after an accident is stored crash data, even if no airbag has deployed. Also involved are aged components, cold solder joints, moisture and corrosion at the plug connectors, and voltage spikes.

Crash data cannot be erased with an ordinary diagnostic tool. Airbag24 removes it during the repair.

Moisture acts on the plug connectors and leads to corrosion. Voltage spikes, such as those from a weak battery or a jump start, put strain on the electronics.

How can you tell that the 95910-H3000 is defective?

A defect in the 95910-H3000 first becomes visible through an indication in the instrument cluster. This includes the airbag warning light, error messages, a diagnostic tool without connection, and a fault memory that cannot be cleared.

• airbag warning light, lit continuously or intermittently
• error message in the instrument cluster
• no connection between the diagnostic tool and the control unit
• fault memory that cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

If you notice any of these signs, have the vehicle checked.

Which vehicles is the 95910-H3000 fitted in?

The control unit 95910-H3000 is fitted in these vehicles: Kia Niro DE (2016-2022). Comparing the label number with this page ensures you have the correct unit in front of you.

These models are affected:

• Kia Niro DE (2016-2022)

Before removal, read out the fault memory. Only the result shows whether the control unit is faulty or whether a plug or a cable is the cause. Compare the part number with this page as well; that only confirms the unit.

For the same vehicles, we also repair control units with the part numbers 95910-A0200, 95910-G5000, 95910-Q4000, 95910-Q4959.

How does the repair of the 95910-H3000 work?

Start by reading out the fault memory, and enclose the log with the unit. Then disconnect the battery, remove the control unit 95910-H3000, create the repair order online and pack the unit for sending.

Airbag24 checks the unit on the test bench, repairs defective components, clears the crash data and carries out a function test. For this work, Airbag24 generally allows 3–4 working days. You then receive your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H3000 get to Airbag24?

You send the 95910-H3000 control unit as a parcel, or book UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Enclose the printed repair order with the parcel and pack the unit shockproof.