Airbag control unit with part number 95910-H3100

What does the airbag control unit 95910-H3100 do?

The airbag control unit 95910-H3100 forms the central switching point of the restraint system (SRS) in Kia. Based on signals from the crash sensors, it decides in a crash within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the system constantly.

A detected fault is shown via the airbag warning light in the instrument cluster. This lets you, as the driver, recognise the condition of the system.

A crash causes the unit to store crash data and lock itself.

Why does the control unit 95910-H3100 fail?

The most common cause is crash data stored after an accident, even without a triggered airbag. A normal diagnostic tool cannot erase it. Other causes are ageing components, moisture at plug connections and voltage spikes.

Airbag24 removes the crash data during the repair so that it does not remain in the unit.

The following points also come into consideration:

• Ageing of the electronic components
• Cold solder joints
• Corrosion and moisture at plug connections
• Voltage spikes from a weak battery or jump-starting

How can you tell that the 95910-H3100 is defective?

Typical is an airbag warning light in the instrument cluster that lights up permanently or intermittently. Added to this are an error message in the instrument cluster, no connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared.

If such signs are present, airbags and seatbelt pretensioners may fail to deploy in an emergency. This affects the entire restraint system.

A check is therefore advisable.

Which vehicles is the 95910-H3100 fitted in?

The 95910-H3100 is fitted in these vehicles: Kia Niro DE (2016-2022).

The list of vehicles follows below.

• Kia Niro DE (2016-2022)

Comparing the part number on the label of the removed unit with this page only ensures that it is the correct unit. It says nothing about the condition. Have the fault memory read out beforehand. Only the log shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0200, 95910-G5000, 95910-Q4000, 95910-Q4959.

How does the repair of the 95910-H3100 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only after that remove the control unit. Next, create the repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and performs a function test. Processing usually takes 3–4 working days at Airbag24. Afterwards your unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H3100 get to Airbag24?

You either send the control unit as a parcel or book a UPS collection for an extra charge. Airbag24 sends the repaired unit back by UPS.

The printed repair order goes into the parcel, and you pack the unit shock-proof.