Airbag control unit with part number 95910-H5000

What does the airbag control unit 95910-H5000 do?

At Hyundai the airbag control unit 95910-H5000 controls the restraint system (SRS). It evaluates the signals of the crash sensors, determines in an accident within milliseconds which airbags and seatbelt pretensioners trigger, and monitors the system continuously. After an accident it records crash data and locks itself.

The unit shows faults via the airbag warning light. In addition it stores entries in the fault memory, which are read out during the check.

Why does the control unit 95910-H5000 fail?

The most frequent cause is stored crash data after an accident, even if no airbag went off. Other causes are aged electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes such as from a weak battery or a jump start.

An ordinary diagnostic tool cannot access this data. Airbag24 erases it during the repair.

In addition, the electronics age, solder joints can stay cold, and moisture gets into plug connections, where it causes corrosion.

How can you tell that the 95910-H5000 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears in the instrument cluster, the diagnostic tool gets no connection to the control unit, or the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then possibly not trigger in an emergency.

The warning light is an immediate signal. Have it checked rather than ignoring it.

A missing connection to the diagnostic tool can also come from the wiring. Only the readout shows where the fault lies.

Which vehicles is the 95910-H5000 fitted in?

The 95910-H5000 is fitted in these vehicles: Hyundai Accent HCR (from 2017).

You can see the assignment in this list:

• Hyundai Accent HCR (from 2017)

Comparing the part number on the label of the removed unit with this page is a sensible step, because it confirms the number. Whether the control unit is defective, however, is determined only by the read-out fault memory. This step comes before removal, because a plug or a cable can cause similar complaints.

For the same vehicles, we also repair control units with the part numbers 95910-J0100, 95910-J0200.

How does the repair of the 95910-H5000 work?

First have the fault memory read out, and the log goes with the parcel. Only after disconnecting the battery do you remove the control unit; afterwards create the repair order online. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the test bench check is followed by replacement of defective components, erasing of the stored crash data and a function test. Then you send in the well-packed unit, and your own repaired unit comes back. The sequence is mandatory, because it makes working on the vehicle safe.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H5000 get to Airbag24?

You take care of the shipment yourself as a parcel, or you book a UPS collection for an extra charge. After the repair the return shipment follows by UPS.

Enclose the printed repair order with the parcel and pack the control unit shock-proof.