Airbag control unit with part number 95910-H6300

What does the airbag control unit 95910-H6300 do?

The airbag control unit 95910-H6300 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the crash sensors, decides within milliseconds in an accident about airbags and seatbelt pretensioners, and monitors the system continuously. It shows faults via the airbag warning light.

The monitoring runs without interruption during operation. Every deviation is recorded in the fault memory.

After an accident, the unit stores crash data and locks itself. This makes the repair a case with its own process.

Why does the control unit 95910-H6300 fail?

Stored crash data are the most common cause, even if no airbag has triggered, and a normal diagnostic tool cannot erase them. Alongside this, aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, for example with a weak battery or jump-starting, can come into play.

Crash data also arise from incidents without airbag triggering and remain in the unit until the repair removes them.

Aged components and cold solder joints lead to failures over time. Moisture and corrosion at the contacts impair signal transmission.

Voltage spikes stress the electronics when the battery weakens.

How can you tell that the 95910-H6300 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears, the diagnostic tool cannot find the control unit, and the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The warning light shows every detected fault, regardless of the driving situation. It is therefore the first place where a defect becomes visible.

A missing access by the diagnostic tool is also among the warning signs that call for an inspection.

Which vehicles is the 95910-H6300 fitted in?

The airbag control unit 95910-H6300 is fitted in these vehicles: Hyundai Elantra AD. The list shows which models are known to use this unit.

Here is the overview of the vehicles with this control unit.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. This only shows that it is the right unit. Have the fault memory read out beforehand, because only the log clarifies whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-H6300 work?

First have the fault memory read out and attach the log, then disconnect the battery. Only then remove the control unit 95910-H6300, create a repair order online and send the well-packed unit in. Inspection, repair and function test at Airbag24 usually take 3–4 working days.

Airbag24 inspects the unit on the test bench and repairs defective components. The stored crash data are erased, a function test follows, and then your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H6300 get to Airbag24?

You send the unit in as a parcel or book UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

The printed repair order goes into the parcel, and the unit is packed shock-proof.