Airbag control unit with part number 95910-H8100

What does the airbag control unit 95910-H8100 do?

The airbag control unit 95910-H8100 controls the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

The unit monitors the system continuously. It shows faults via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and locks itself.

Why does the control unit 95910-H8100 fail?

Crash data stored after an accident is the most common cause with the 95910-H8100, even if no airbag has deployed. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible.

Stored crash data cannot be deleted with a normal diagnostic tool. Airbag24 deletes it during the repair.

Besides the crash data, ageing, connection problems and voltage spikes play a role. Electronics age, and solder joints can go cold. Moisture and corrosion attack plug connections, and a weak battery or a jump start puts strain on the electronics.

How can you tell that the 95910-H8100 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently when the 95910-H8100 is defective. In addition, there is an error message in the instrument cluster, the diagnostic tool has no connection, and the fault memory cannot be cleared.

The light is the most important sign the vehicle gives you. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Please act promptly when the display appears.

Which vehicles is the 95910-H8100 fitted in?

The control unit 95910-H8100 is installed in these vehicles: Kia Stonic YB (from 2017); Kia Rio YB (from 2017).

The vehicle list follows below:

• Kia Stonic YB (from 2017)
• Kia Rio YB (from 2017)

First, compare the part number on the label of the removed unit with this page, so you can confirm it is the right unit. Second, have the fault memory read out beforehand. Only this log shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-H8210, 95910-H8330, 95910H9430.

How does the repair of the 95910-H8100 work?

With the 95910-H8100, have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Afterwards, create a repair order online and send the unit in well packed. At Airbag24, processing usually takes 3–4 working days.

Airbag24 inspects the unit on the test bench, repairs or renews defective components, deletes stored crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H8100 get to Airbag24?

You send the control unit 95910-H8100 as a package to Airbag24 or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you via UPS.

The printed repair order goes in the package, and the unit is packed shockproof.