Airbag control unit with part number 95910-H9200

What does the airbag control unit 95910-H9200 do?

The airbag control unit 95910-H9200 is the central control unit of the restraint system (SRS) of Kia. It checks the signals from the crash sensors and determines within milliseconds, in an accident, which airbags and seatbelt pretensioners are triggered.

In addition, it monitors the entire system continuously. Detected faults appear via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-H9200 fail?

Stored crash data from an accident is the most common cause with the 95910-H9200, even if no airbag has deployed. Aged components, cold solder joints, moisture and corrosion, and voltage spikes are also possible.

Stored crash data remains in the control unit. A normal diagnostic tool cannot delete it, and during the repair Airbag24 deletes it.

The other causes lie in the electronics themselves or in their surroundings: components age, solder joints can go cold, moisture and corrosion attack plug connections, and voltage spikes arise, for example, from a weak battery or a jump start.

How can you tell that the 95910-H9200 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently when the 95910-H9200 is defective, and error messages appear in the instrument cluster. In addition, the diagnostic tool has no contact with the control unit, and the fault memory cannot be cleared.

• Airbag warning light lights up permanently or intermittently
• Error message in the instrument cluster
• Diagnostic tool does not get a connection to the control unit
• Fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then fail to deploy. Please take the display seriously.

Which vehicles is the 95910-H9200 fitted in?

The control unit 95910-H9200 is installed in these vehicles: Kia Rio YB (from 2017).

The vehicle list follows here:

• Kia Rio YB (from 2017)

First, compare the part number on the label of the removed unit with this page. This ensures that it is the right unit. Second, have the fault memory read out beforehand. Only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-H8210, 95910-H8330, 95910H9430.

How does the repair of the 95910-H9200 work?

First, have the fault memory read out and attach the log. Then disconnect the battery and remove the control unit. Afterwards, create a repair order online and send the unit in well packed. At Airbag24, processing usually takes 3–4 working days.

Airbag24 inspects the unit on the test bench, repairs defective components, deletes stored crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H9200 get to Airbag24?

You send the control unit 95910-H9200 as a package or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you via UPS.

Place the printed repair order in the package and pack the control unit shockproof.