Airbag control unit with part number 95910-H9210

What does the airbag control unit 95910-H9210 do?

The airbag control unit 95910-H9210 controls the restraint system (SRS) of Kia. It reads the sensor signals, determines in an accident which airbags and seatbelt pretensioners fire, and continuously checks the system. If it detects a fault, it indicates this via the airbag warning light.

The crash sensors supply the measured values on which the unit bases its decisions. If the control fails, the restraint system as a whole can no longer work reliably.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-H9210 fail?

Most often the cause lies in crash data stored from an earlier accident, even if no airbag has triggered. These data cannot be deleted with a standard diagnostic tool. Other causes are aged components, cold solder joints, moisture and corrosion, and voltage spikes.

In detail, these points apply:

• aged electronic components on the circuit board
• cold or cracked solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

Which of these causes is present in an individual case only shows up during the inspection.

How can you tell that the 95910-H9210 is defective?

The airbag warning light in the instrument cluster indicates a defect in the 95910-H9210 by lighting up permanently or intermittently. In addition there are error messages in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

If the warning light comes on, do not put it off. In an emergency, airbags and seatbelt pretensioners may then possibly fail to deploy, even if the vehicle otherwise drives without any problems.

If the warning light only comes on intermittently, the same applies. An inspection will establish whether the unit itself is affected.

Which vehicles is the 95910-H9210 fitted in?

The control unit 95910-H9210 is fitted in vehicles from Kia: Kia Rio YB (from 2017).

The overview:

• Kia Rio YB (from 2017)

Comparing the part number on the label of the removed unit with this page only ensures that you have the correct unit in front of you. Whether the control unit is defective or a plug or a cable is the cause is only established by the fault memory. Therefore have it read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-H8210, 95910-H8330, 95910H9430.

How does the repair of the 95910-H9210 work?

First have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit. Then create a repair order online and send the unit in, well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 tests the submitted unit on the test bench, repairs defective components, deletes stored crash data and carries out a functional test. Your own unit is then returned to you.

This processing time describes exclusively these tasks at Airbag24. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H9210 get to Airbag24?

You send the control unit 95910-H9210 in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

The printed repair order belongs in the parcel. Pack the unit shockproof so that it is not damaged on the way.