Airbag control unit with part number 95910-H9330

What does the airbag control unit 95910-H9330 do?

The airbag control unit 95910-H9330 is the central control unit of the restraint system (SRS) in Kia. It analyses the signals from the crash sensors, decides within milliseconds in the event of a crash whether airbags and seatbelt pretensioners are triggered, and monitors the system during operation.

If the unit detects a fault, it shows this via the airbag warning light in the instrument cluster. This is therefore the first sign for you that something is wrong in the restraint system.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-H9330 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered; a normal diagnostic tool cannot delete it. Other causes include aged electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes.

The fact that no airbag fired does not change the storage. The data remains stored in the unit.

The other causes are linked to ageing and environmental influences. Electronic components lose reliability over time, solder joints can go cold, and moisture or corrosion attack the plugs. Voltage spikes, for example from a weak battery or a jump start, can also damage the electronics.

How can you tell that the 95910-H9330 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears in the instrument cluster, the diagnostic tool cannot reach the control unit and the fault memory cannot be cleared. In this state, airbags and seatbelt pretensioners may not trigger in an emergency.

The light is a warning signal that the control unit reports itself. Even if the vehicle seems normal in everyday use, it counts as a sign that must be taken seriously.

However, an error message alone does not reveal the cause. Only reading out the fault memory narrows down the cause, and then it shows whether the control unit itself or a component around it is affected.

Which vehicles is the 95910-H9330 fitted in?

The control unit 95910-H9330 is fitted in these vehicles: Kia Rio YB (from 2017). Whether it fits your car is decided by the part number on the unit.

The overview lists the vehicles assigned to this part number:

• Kia Rio YB (from 2017)

Compare the part number on the label of the removed unit with this page. This only confirms that it is the right unit. Also have the fault memory read out before removal, because only the log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-H8210, 95910-H8330, 95910H9430.

How does the repair of the 95910-H9330 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit; afterwards create a repair order online and send in the well-packed unit. Airbag24 checks it on the test bench, repairs defective components, deletes the stored crash data and carries out a function test before your own unit is returned.

This sequence is for your safety and is therefore mandatory. Checking, repairing and testing at Airbag24 usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-H9330 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns your own unit to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.