Airbag control unit with part number 95910-J0200

What does the airbag control unit 95910-J0200 do?

The airbag control unit 95910-J0200 manages the restraint system (SRS) in the Hyundai vehicle. It analyses the crash sensors and decides in a crash which airbags and seatbelt pretensioners fire.

While driving it continuously checks the function of the system. It stores detected faults and displays them via the airbag warning light.

An accident causes crash data to be stored in memory and the unit to lock itself. The repair lifts this lock.

Why does the control unit 95910-J0200 fail?

The most common cause is crash data from an accident, which remains in the unit even if no airbag was triggered. Further causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

The crash data remains stored. An ordinary diagnostic tool cannot remove it. Airbag24 erases it during the repair.

Electronic components are subject to ageing. Cold solder joints can cause contact problems that occur only intermittently.

Moisture and corrosion damage the plug connectors, and voltage spikes from a weak battery or a jump start put the electronics under stress.

How can you tell that the 95910-J0200 is defective?

A defect is indicated mainly by the airbag warning light in the instrument cluster and by fault messages in the instrument cluster. In addition there may be no connection from the diagnostic tool and a fault memory that cannot be cleared.

• The airbag warning light stays on permanently or comes on again and again.
• A fault message appears in the instrument cluster.
• A diagnostic tool does not reach the control unit.
• The fault memory cannot be cleared.

While such a fault exists, airbags and seatbelt pretensioners may not deploy in an emergency. Have such a finding examined soon rather than overlooking the warning light.

Which vehicles is the 95910-J0200 fitted in?

The control unit 95910-J0200 is installed in these vehicles: Hyundai Accent HCR (from 2017).

The list shows the assignment to this part number:

• Hyundai Accent HCR (from 2017)

Comparing the part number on the housing label with this page only establishes that you have the correct unit.

Have the fault memory read out before removal. This log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 28461473, 95910-1R250.

How does the repair of the 95910-J0200 work?

At Airbag24, checking, repairing and testing usually take 3–4 working days. Beforehand you have the fault memory read out, attach the log and disconnect the battery before you remove the control unit.

Then you create the repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components, erases the stored crash data and carries out a functional test. Only then is your own unit sent back.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-J0200 get to Airbag24?

You send the control unit 95910-J0200 as a parcel or arrange a UPS collection for an extra charge. After the repair Airbag24 returns it to you by UPS.

You print the repair order, enclose it with the unit and pack everything shock-proof.