Airbag control unit with part number 95910-J7400

What does the airbag control unit 95910-J7400 do?

The airbag control unit 95910-J7400 is the control unit of the restraint system (SRS) in Kia. It reads out the crash sensors, selects the appropriate airbags and seatbelt pretensioners in an accident, and reports faults to the airbag warning light.

The electronics check the function of the system continuously. If they detect a fault, they store it in the memory.

After an accident, the unit writes crash data and switches into a locked state.

Why does the control unit 95910-J7400 fail?

For the control unit 95910-J7400, the most common cause is an accident after which crash data is stored in the memory, even if no airbag was triggered. Aged electronic components, cold solder joints, moisture with corrosion at plug connections and voltage spikes are also possible causes.

The crash data stays in the memory until it is erased. An ordinary diagnostic tool cannot do this, whereas Airbag24 removes it during the repair.

Voltage spikes, for example from a weak battery or after a jump start, put strain on the electronics and can damage components.

How can you tell that the 95910-J7400 is defective?

On the 95910-J7400, a defect first shows up as the airbag warning light in the instrument cluster, which lights up permanently or only intermittently. A fault message in the instrument cluster, a diagnostic tool without a connection to the control unit and a fault memory that cannot be cleared also come into play.

If the control unit is defective, airbags and seatbelt pretensioners may possibly fail to deploy in an emergency.

Anyone who ignores the warning light loses time. Therefore have the system checked promptly.

Which vehicles is the 95910-J7400 fitted in?

The control unit 95910-J7400 is fitted in these vehicles: Kia cee'd CD (from 2018). Before you remove it, compare the number on the label with this page, so that you have the right unit in front of you.

In detail, these models are concerned:

• Kia cee'd CD (from 2018)

A note on diagnosis: only the fault memory read out shows whether the control unit itself is defective or whether a plug or cable is the cause. The comparison of the label merely confirms the unit.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 95910-1H050, 95910-J7000, 959101H200.

How does the repair of the 95910-J7400 work?

At the start, the fault memory is read out, and the log travels with the unit. Then you disconnect the battery, remove the control unit 95910-J7400 and send it in with the repair order created online.

Airbag24 checks the unit on the test bench, repairs defective components, erases crash data and carries out a function test. For testing, repairing and function testing, Airbag24 usually allows 3–4 working days. Afterwards you get your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-J7400 get to Airbag24?

The control unit 95910-J7400 goes to Airbag24 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

The printed repair order belongs in the parcel, and the unit must be packed shock-proof.