Airbag control unit with part number 95910-J7500

What does the airbag control unit 95910-J7500 do?

The control unit 95910-J7500 is the evaluation unit of the airbag restraint system (SRS) in Kia. It reads the crash sensors, decides in the event of an impact which airbags and seatbelt pretensioners to trigger, and monitors the system permanently. If it detects a fault, the airbag warning light comes on.

Monitoring covers all components of the system, so that any fault is noticed.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-J7500 fail?

The most common reason for failure is crash data that remained stored after an accident, even if no airbag deployed. In addition, ageing components, cold solder joints, dampness and corrosion on plugs, and voltage spikes can play a role.

Such data cannot be removed with common diagnostic tools. Airbag24 clears it during the repair.

The other causes affect the electronics, the contacts or the power supply. Which of these applies is shown only by examination of the unit.

How can you tell that the 95910-J7500 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and a fault message appears in the instrument cluster. In addition, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

Such signs mean that the airbags and seatbelt pretensioners may not deploy in an emergency. The light therefore shows the defect and does not hide it.

So have the check carried out promptly.

Which vehicles is the 95910-J7500 fitted in?

The control unit 95910-J7500 is fitted in these vehicles: Kia cee'd CD (from 2018).

You will find the suitable models here at a glance:

• Kia cee'd CD (from 2018)

Using the label on the removed unit, check against this page whether the details match. Before that, have the fault memory read out, because only its log shows whether the control unit or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 95910-1H050, 95910-J7000, 959101H200.

How does the repair of the 95910-J7500 work?

Have the fault memory read out and the log enclosed. Then disconnect the battery and remove the control unit. Create the repair order online and send the unit in, well packed. The time for testing, repairing and checking at Airbag24 is usually 3–4 working days.

Airbag24 establishes the cause during the examination, replaces defective components and clears the crash data. A function test follows at the end, and your own unit is then returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-J7500 get to Airbag24?

You can send the unit as a parcel or arrange a UPS collection for an extra charge. Airbag24 sends it back by UPS after the repair. The printed repair order goes with the parcel.

Sturdy, shock-resistant packaging is suitable for transport.