Airbag control unit with part number 95910-K0200

What does the airbag control unit 95910-K0200 do?

The airbag control unit 95910-K0200 is the control unit of the restraint system (SRS) of Kia. In an accident it evaluates the crash sensors and determines which airbags and seatbelt pretensioners trigger.

It works in the background and checks the system continuously. If it detects a fault, it creates an entry in the fault memory and shows the fault via the airbag warning light.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-K0200 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered. A normal diagnostic tool cannot erase it. Other causes include aged electronic components, cold solder joints, moisture and corrosion, and voltage spikes.

The crash data therefore arises even in accidents where no airbag was triggered. It is for that reason a point that must not be overlooked during fault finding.

The other causes mainly concern ageing, moisture on the plugs and fluctuations in the power supply. How strongly they play a role in your case is shown by the examination.

How can you tell that the 95910-K0200 is defective?

The airbag warning light stays on permanently or intermittently, a fault message appears in the instrument cluster, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

As long as these signs persist, airbags and seatbelt pretensioners may possibly fail to trigger in an emergency. The warning light indicates the defect, which is why a prompt check is the right step.

Which vehicles is the 95910-K0200 fitted in?

The control unit 95910-K0200 is fitted in these vehicles: Kia Soul SK3 (from 2019).

The overview shows which models Airbag24 has assigned to this part number.

• Kia Soul SK3 (from 2019)

A comparison of the part number on the removed unit with this page confirms that you have the matching unit. It does not say whether the control unit is causing the fault. Therefore have the fault memory read out beforehand, which shows whether the unit or a plug or cable is the cause.

How does the repair of the 95910-K0200 work?

First have the fault memory read out and enclose the protocol. Then disconnect the battery, remove the control unit, and then create a repair order online and send in the well-packed unit. Airbag24 needs 3–4 working days in general for processing.

The sequence is mandatory for safety reasons. Make sure the unit is not damaged while packing it.

At Airbag24 the control unit is checked on the test bench, defective components are replaced and the stored crash data is erased. After a function test, your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K0200 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. UPS handles the return shipment to you.

Enclose the printed repair order with the parcel and pack the control unit shock-proof.