Airbag control unit with part number 95910-K0600

What does the airbag control unit 95910-K0600 do?

The airbag control unit 95910-K0600 manages the restraint system (SRS) in Kia vehicles. It processes the data of the crash sensors, decides in an accident on airbags and seatbelt pretensioners, and monitors the system without interruption.

Part of the evaluation is judging the strength and course of a deceleration. On this basis the elements to be activated are decided within fractions of a second.

Faults found are stored by the unit and displayed via the airbag warning light. After an accident it creates crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-K0600 fail?

Stored crash data are the most common cause, even when no airbag has fired. A normal diagnostic tool cannot erase them. In addition there are ageing components, moisture at plug connections and voltage spikes.

The crash data remain in the unit after the accident. A usual readout tool can access them but cannot remove them, so they are displayed again at every new check.

In addition, components can age over time, solder joints can go cold, and moisture can attack plug connections. Voltage spikes from the vehicle electrical system, for example from a weak battery, are also among the triggers.

How can you tell that the 95910-K0600 is defective?

The airbag warning light in the instrument cluster lights up permanently or switches on intermittently. A fault message in the instrument cluster may appear at the same time, and the diagnostic tool may not find the control unit.

A fault memory that cannot be cleared is a further indication of a fault in the system. All these signs show that the system must be checked before it works reliably again.

As long as the defect persists, airbags and seatbelt pretensioners may possibly not fire in an emergency. Therefore have the vehicle checked promptly.

Which vehicles is the 95910-K0600 fitted in?

According to the assignment, this unit 95910-K0600 is fitted in these vehicles: Kia Soul SK3 (from 2019).

This control unit is listed for the following models:

• Kia Soul SK3 (from 2019)

For one, compare the part number on the label of the removed unit with this page, which only confirms the assignment. For another, have the fault memory read out beforehand. Only the result shows whether the control unit is defective or whether a plug or cable is the cause.

How does the repair of the 95910-K0600 work?

Processing at Airbag24 generally takes 3–4 working days. The time limit applies to checking, repairing and testing the unit in-house.

You first read out the fault memory, disconnect the battery and remove the control unit. Then you create the repair order online for posting.

Airbag24 checks the unit on the test bench and repairs defective components. Then the crash data are erased and a function test follows. The own unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K0600 get to Airbag24?

The unit goes to Airbag24 as a parcel, or you book a UPS collection for an extra charge. The return after the repair is made by UPS.

Enclose the printed repair order with the parcel. The unit is packed shock-proof so that it survives transport undamaged.