Airbag control unit with part number 95910-K2000

What does the airbag control unit 95910-K2000 do?

The airbag control unit 95910-K2000 acts as a computer that controls the restraint system (SRS) of Hyundai. It checks the signals from the crash sensors, determines in an accident which airbags and seatbelt pretensioners trigger, and monitors the entire system.

If there is a fault, the airbag warning light comes on. After an accident the unit stores crash data and locks itself. Only the repair lifts this lock.

In an emergency every millisecond counts, which is why monitoring runs without interruption.

Why does the control unit 95910-K2000 fail?

For this 95910-K2000, the most common cause is crash data stored after an accident, even if no airbag deployed. A normal diagnostic tool cannot delete it. Aged electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes also play a role.

The data is stored in the control unit itself. The fact that no airbag fired does not rule out such storage.

The other causes concern the electronics and their connections. Aged components eventually work unreliably, cold solder joints lose contact, and moisture with corrosion gradually weakens the plug connections. Voltage spikes, for example during a jump start or with a weak battery, can place additional stress on the electronics.

How can you tell that the 95910-K2000 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently when there is a defect on the 95910-K2000. Also present may be a fault message in the instrument cluster, a diagnostic tool without a connection to the control unit, and a fault memory that cannot be cleared. In that case airbags and seatbelt pretensioners may not trigger in an emergency.

The warning light is the most visible sign that the system has detected a fault. Do not ignore it.

A device with such signs does not necessarily fail immediately, but in an emergency every triggering counts. A check creates clarity before you remove anything.

Which vehicles is the 95910-K2000 fitted in?

The assignment applies to the part number 95910-K2000 and to the list below. The control unit 95910-K2000 is fitted in the following vehicles: Hyundai Venue QX (from 2019).

The list in detail:

• Hyundai Venue QX (from 2019)

Comparing the label is a sensible first step, because it confirms that you have the right unit in front of you. It does nothing more. The cause is clarified only by the fault memory: when it is read out, it shows whether the control unit is defective or whether a plug or cable is the cause. So have it read out before you remove the unit.

For the same vehicles, we also repair control units with the part numbers 95910-K2100, 95910-K2500.

How does the repair of the 95910-K2000 work?

First have the fault memory read out and attach the log to the parcel. Only then disconnect the battery and remove the control unit 95910-K2000. Online you create the repair order, and you send the unit well packed.

Airbag24 processes the unit usually within 3–4 working days: it is checked on the test bench, defective components are replaced, stored crash data is deleted, and a function test follows.

Once the test has been passed, your own unit returns to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K2000 get to Airbag24?

You send the control unit 95910-K2000 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

The printed repair order goes into the parcel, and the unit must be packed shock-proof.