Airbag control unit with part number 95910-K2050

What does the airbag control unit 95910-K2050 do?

The airbag control unit 95910-K2050 performs the evaluation of the restraint system at Hyundai. It receives the measured values from the crash sensors, calculates in milliseconds which airbags and seatbelt pretensioners must be triggered, and checks the remaining components.

In case of a fault it switches on the airbag warning light in the instrument cluster. After an accident the unit stores crash data and locks itself.

The checking takes place continuously, so that the system is fully ready in an emergency.

Why does the control unit 95910-K2050 fail?

The most common cause is crash data from an earlier accident, even without a triggered airbag. Added to this are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data remains stored in the unit and cannot be erased with a normal diagnostic tool. Airbag24 erases it during the repair of control unit 95910-K2050.

The other causes affect the electronics in different ways. Aged components and cold solder joints disturb signal transmission, moisture and corrosion impair the contacts, and voltage spikes, for example with a weak battery or after jump-starting, additionally stress the components.

How can you tell that the 95910-K2050 is defective?

A defect on control unit 95910-K2050 shows up as an airbag warning light in the instrument cluster that lights up permanently or intermittently, as an error message in the instrument cluster, as a missing connection to the diagnostic tool, or as a fault memory that cannot be cleared.

The airbag warning light in the instrument cluster is the most important signal, because it makes the finding immediately visible. As long as the defect exists, airbags and seatbelt pretensioners may not be able to trigger in an emergency.

Which vehicles is the 95910-K2050 fitted in?

The control unit 95910-K2050 is fitted in these vehicles: Hyundai Venue QX (from 2019).

The following list shows the vehicles that Airbag24 has on record for this part number.

• Hyundai Venue QX (from 2019)

Compare the part number on the label of the removed unit with this page, so that you can see whether it is the right unit. Also have the fault memory read out beforehand, because this result shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-K2100, 95910-K2500.

How does the repair of the 95910-K2050 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove control unit 95910-K2050. Then create a repair order online and send the well-packed unit in; Airbag24 checks it, replaces defective components, erases stored crash data and carries out a function test.

Processing at Airbag24 usually takes 3–4 working days. Stored crash data is erased by Airbag24 in the process as well.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K2050 get to Airbag24?

You send control unit 95910-K2050 in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof before handing it over.