Airbag control unit with part number 95910-K2400

What does the airbag control unit 95910-K2400 do?

The airbag control unit 95910-K2400 is the central SRS control unit for Hyundai. It processes the signals from the crash sensors, triggers the intended airbags and seatbelt pretensioners within milliseconds in an accident, and monitors the system permanently.

It reports faults via the airbag warning light. After an accident it stores crash data and locks itself; the lock is only lifted by the repair.

Why does the control unit 95910-K2400 fail?

Most often the cause is crash data stored after an accident, even without a triggered airbag; a normal diagnostic tool cannot erase this data. Besides that there are ageing electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes such as those from a weak battery or a jump start.

Which of these causes is present can be narrowed down with the fault memory.

How can you tell that the 95910-K2400 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. A fault message may accompany it in the instrument cluster, the diagnostic tool does not connect to the control unit, and the fault memory cannot be erased.

In such a state airbags and seatbelt pretensioners may fail to trigger in an emergency.

The warning light is therefore a clear warning that you should take seriously.

Which vehicles is the 95910-K2400 fitted in?

Check first using the part number whether your model is affected. The airbag control unit 95910-K2400 is fitted in these vehicles: Hyundai Venue QX (from 2019).

For orientation, the vehicles that belong to this part number are listed here:

• Hyundai Venue QX (from 2019)

Compare the part number on the label of the removed unit with this page; that only confirms the right unit. Have the fault memory read out before removal, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-K2100, 95910-K2500.

How does the repair of the 95910-K2400 work?

Processing at Airbag24 usually takes 3–4 working days. It comprises checking, repairing and testing the unit.

Beforehand, have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit. Then create a repair order online and send the unit in well packed.

Airbag24 checks it on the test bench, deletes stored crash data and runs a function test, after which your own unit is returned. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K2400 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

The printed repair order goes into the parcel, and you pack the unit shock-proof.