Airbag control unit with part number 95910-K2650

What does the airbag control unit 95910-K2650 do?

The airbag control unit 95910-K2650 manages the SRS restraint system of Hyundai. It reads the crash sensors, decides in an accident which airbags and seatbelt pretensioners are triggered, and checks continuously whether all components are working.

If a fault is detected, the unit switches on the airbag warning light in the instrument cluster.

After an accident it creates crash data and remains locked afterwards.

Why does the control unit 95910-K2650 fail?

The most common cause is crash data stored after an accident, even without an airbag having been triggered. Other causes include aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

An ordinary diagnostic tool cannot erase the data. Airbag24 erases it as part of the repair.

In addition, aged electronic components can become a problem, as can solder joints that have stayed cold. Moisture and corrosion at plug connections attack the contacts, and voltage spikes from a weak battery or a jump start put extra strain on the system.

How can you tell that the 95910-K2650 is defective?

A defect becomes visible when the airbag warning light in the instrument cluster lights up permanently or intermittently. In addition there is an error message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

As long as these signs persist, airbags and seatbelt pretensioners may not be able to trigger in an emergency.

Which vehicles is the 95910-K2650 fitted in?

Vehicle assignments exist for 95910-K2650. The control unit is fitted in these vehicles: Hyundai Venue QX (from 2019).

The details in turn:

• Hyundai Venue QX (from 2019)

You compare the number on the label of the removed unit with this page. That only clarifies whether it is the correct unit. Have the fault memory read out before removal, because only this result shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-K2100, 95910-K2500.

How does the repair of the 95910-K2650 work?

First have the fault memory read out and attach the log. Then disconnect the battery and remove the control unit. Only then create a repair order online and send the unit in, well packed.

Airbag24 checks the unit on the test bench, replaces damaged parts, erases stored crash data and carries out a function test. The unit then goes back to you. Processing usually takes 3–4 working days and covers only checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K2650 get to Airbag24?

You send the unit in as a parcel or book a UPS collection for an extra charge. After the repair, it is returned to you by UPS.

Put the printed repair order into the parcel and make sure the packaging is shock-resistant.