Airbag control unit with part number 95910-K7000

What does the airbag control unit 95910-K7000 do?

The airbag control unit 95910-K7000 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and decides in a crash within milliseconds which airbags and seatbelt pretensioners are triggered. Faults in the system are reported via the airbag warning light.

While the vehicle is in operation, the unit runs in the background and checks the connected components. After an accident, it stores crash data and locks itself.

For this evaluation, the control unit needs a stable power supply and undamaged wiring to the sensors and triggers.

Why does the control unit 95910-K7000 fail?

Stored crash data is the most common cause when the control unit 95910-K7000 fails, even if no airbag has deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start.

Crash data of this kind cannot be erased with a normal diagnostic tool.

The other causes concern the electronics themselves. Components age over time, solder joints can be cold, and moisture and corrosion attack plug connections.

How can you tell that the 95910-K7000 is defective?

A defect in the 95910-K7000 shows itself through the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Also present are an error message in the instrument cluster, no connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared. The airbags and seatbelt pretensioners may then fail to deploy in an emergency.

The warning light is the most noticeable sign and is hard to overlook in everyday use.

The warning light and the error message belong together and form the clearest signal you will receive.

Which vehicles is the 95910-K7000 fitted in?

The unit is intended for Hyundai. The 95910-K7000 is fitted in these vehicles: Hyundai i10 BA (2019-2023) and BA Facelift (from 2023).

We have the following vehicles on record for this part number:

• Hyundai i10 BA (2019-2023)
• Hyundai i10 BA Facelift (from 2023)

Before removal, it is advisable to compare: the part number on the label of the removed unit can be checked against this page, which only confirms that it is the right unit. Also have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-K7250.

How does the repair of the 95910-K7000 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit 95910-K7000; next, create a repair order online and send in the well-packed unit. Airbag24 checks it on the test bench, repairs defective components, erases stored crash data and carries out a function test, after which the unit is returned to you. Processing at Airbag24 usually takes 3–4 working days.

The order is a safety measure: the control unit is only removed once the battery has been disconnected. Pack the unit carefully before you send it.

At Airbag24, first the defective components are identified. Repair and function test follow, so that the unit comes back fully tested.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K7000 get to Airbag24?

You send the control unit 95910-K7000 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Enclose the printed repair order in the parcel and pack the unit shockproof.